{"product_id":"grimmspeed-08-15-evo-x-boost-control-solenoid","title":"GrimmSpeed 03-06 Evo 8\/9 Boost Control Solenoid","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGet into Boost Much Quicker\u003c\/strong\u003e\u003cbr\u003e(Flows 10% more than the competition)\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug and Play\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003einto OEM Harness\u003cbr\u003e(no splicing wire like other BCS!)\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith clean install\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks Safely with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFactory EVO ECU\u003c\/strong\u003e\u003cbr\u003e(custom coil to match ECU)\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eNickel Plated Fittings as this is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBuilt To Last\u003c\/strong\u003e\u003cbr\u003e(not the easily breakable plastic fittings!)\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Install\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand Very Easy to Tune\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Only\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDirect Bolt-IN BCS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor EVO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe GrimmSpeed Mitsubishi EVO Boost Control Solenoid is designed to work with your factory computer (requires tuning). It will not reduce the life of your factory computer because it is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edesigned to draw the same ammount of power as the factory BCS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebut flows better and reacts faster. It plugs in and requires\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno splicing or soldering of resistors\u003c\/strong\u003e. With the included bracket you can bolt it in, plug in the connector, and start tuning for fast boost response, increased boost pressure and free up lots of power. Planning on returning the car to stock? Just reverse installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy run an Electronic BCS over a Manual Boost Controller?\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003eA MBC allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm thats what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control. Revolutionizing the EVO boost solenoid market, we have created\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emodel specific install brackets\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat allow you to directly fit our Boost Solenoid into your EVO for a factory fit. No more Zip-tying! We give you the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efactory fitment\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eyou have been waiting for.\u003cbr\u003e\u003cbr\u003eStaying with the OEM fitment theme, our Boost Solenoid uses a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eEVO style wiring harness so you can simply unplug your OEM solenoid and plug ours in\u003c\/strong\u003e. No more cutting the oem wiring and crimping wires together!\u003cbr\u003e\u003cbr\u003eAlso new to the EVO boost solenoid market, we have used\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eultra low-profile hose fittings\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edon't have to worry\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eabout them snapping off like the plastic hose fittings!\u003cbr\u003e\u003cbr\u003eMore Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUsers can use AN fittings with the solenoid.\u003c\/li\u003e\n\u003cli\u003eMAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).\u003c\/li\u003e\n\u003cli\u003eSpecifically designed by GrimmSpeed to work safely with the factory EVO ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!\u003c\/li\u003e\n\u003cli\u003eThe only direct bolt in design for the EVO. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)\u003c\/li\u003e\n\u003cli\u003eFaster response and greater flow than any other valve out there. (by more than 10%!)\u003c\/li\u003e\n\u003cli\u003eNickel plated brass fittings. (unlike the competitors failure prone plastic fittings)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Grimmspeed","offers":[{"title":"Default Title","offer_id":43251039797402,"sku":"ETS-grm057019","price":182.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/5f056408-540c-4058-88b5-4311c248cbc4-800.jpg?v=1675289492","url":"https:\/\/www.speedfactoryracing.net\/en-ca\/products\/grimmspeed-08-15-evo-x-boost-control-solenoid","provider":"SpeedFactoryRacing","version":"1.0","type":"link"}