{"title":"Boost Control \/ MAP Sensors \/ Battery","description":"\u003cp\u003e\u003c\/p\u003e","products":[{"product_id":"speedfactory-4-bar-map-sensor-for-k-series","title":"SpeedFactory Racing 4 Bar MAP Sensor for K Series (1-43+PSI)","description":"\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan data-mce-fragment=\"1\"\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003cbr\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market). \u003cbr\u003e* Automatic temperature compensation. \u003cbr\u003e* True linear scaling for perfect drivability at all boost and vacuum levels. \u003cbr\u003e* Compatible with all aftermarket engine management systems. \u003cbr\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. \u003cbr\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors. \u003cbr\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor. \u003cbr\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/p\u003e\n\u003cp\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitments:\u003c\/strong\u003e \u003cbr\u003eK20 and K24 engines using factory K Series Style MAP sensor\u003cbr\u003e2\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e006+ S2000\u003cbr\u003e2002+ CR-V\u003cbr\u003e2002+ RSX\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e2001+ EP-3\u003cbr\u003e2001-2005 Civic D17\u003cbr\u003e2006+ Civic Si\u003cbr\u003e2004-2008 TSX\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":35088120348826,"sku":"SF-01-017","price":119.69,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":35088120381594,"sku":"SF-01-018","price":119.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/red_k_s.jpg?v=1594261655"},{"product_id":"speedfactory-3-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Kit","description":"\u003cp\u003eThe SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate. (For higher boost levels and better off-the-line boost control please see our 4 Port Boost Control Solenoid Kit).\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product can be used with internal or external wastegates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e34Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003eFinding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpeedFactory 3-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (2) 1\/8\" x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-3-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253)566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"3-Port Solenoid Only","offer_id":35089932877978,"sku":"SF-01-051","price":117.59,"currency_code":"USD","in_stock":true},{"title":"3-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089932845210,"sku":"IG SF-01-051 + SF-01-051-B","price":130.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/3_port_logo_2.jpg?v=1594268866"},{"product_id":"speedfactory-4-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 4-Port Boost Control Solenoid Kit (External Wastegates Only)","description":"\u003cp\u003eThe SpeedFactory Racing 4-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 6-7 times the spring pressure of the wastegate and offers very precise control at very high boost levels.\u003c\/p\u003e\n\u003cp\u003eThe 4 Port Solenoid also allows you to use much lower wastegate spring pressures for better boost control when launching .\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product is for use with external wastegates only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e25Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003e4 port solenoids are more sensitive than 3 port solenoids and finding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpeedFactory 4-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (3) 1\/8\" NPT x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-4-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253) 566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"4-Port Solenoid Only","offer_id":35089935073434,"sku":"SF-01-052","price":139.64,"currency_code":"USD","in_stock":true},{"title":"4-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089935040666,"sku":"IG SF-01-052 + SF-01-052-B","price":151.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/4_port_logo_s.jpg?v=1594268871"},{"product_id":"speedfactory-racing-3-port-boost-control-solenoid-bracket-with-hardware","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Mounting Bracket with Hardware","description":"\u003cp\u003eThe SpeedFactory Racing 3-Port Boost Control Solenoid Mounting Bracket kit allows you to securely and professionally mount your SpeedFactory Electronic Boost Control Solenoid in your engine compartment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003cbr\u003e\u003c\/strong\u003e(1) laser-cut 3\/16\" thick mounting bracket, (2) stainless steel hex head machine screws + washers, and easily mounts to your chassis using any M6x1.0 bolt of your choice.\u003c\/p\u003e\n\u003cp\u003eNote: The use of Loctite is strongly recommended on solenoid bracket bolt threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090419515546,"sku":"SF-01-051-B","price":19.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/mounting_bracket_1.jpg?v=1753810281"},{"product_id":"speedfactory-racing-4-port-boost-control-solenoid-bracket-with-hardware","title":"SpeedFactory Racing 4-Port Boost Control Solenoid Mounting Bracket with Hardware","description":"\u003cp\u003eThe SpeedFactory Racing 4-Port Boost Control Solenoid Mounting Bracket kit allows you to securely and professionally mount your SpeedFactory Electronic Boost Control Solenoid in your engine compartment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(1) laser-cut 3\/16\" thick mounting bracket, (2) stainless steel hex head machine screws + washers, and easily mounts to your chassis using any M6x1.0 bolt of your choice.\u003c\/p\u003e\n\u003cp\u003eNote: The use of Loctite is strongly recommended on solenoid bracket bolt threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090421940378,"sku":"SF-01-052-B","price":19.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/mounting_bracket_1_1.jpg?v=1753810215"},{"product_id":"speedfactory-racing-16v-battery-box","title":"SpeedFactory Racing 16V Battery Box - Driver Or Passenger Mount","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eMake things easy on yourself\u003c\/strong\u003e and avoid the frustration of fabricating a mounting solution for your valuable 16V battery - \u003cstrong\u003ewe’ve done the work for you!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe SpeedFactory Racing 16V Battery Box is designed for \u003cstrong\u003e\u003cem\u003epassenger or driver's side\u003c\/em\u003e\u003c\/strong\u003e framerail mounting and for use with XS Power 16V AGM lead acid batteries - models XP1000, D1600, and S1600. There are very slight differences in the case sizing between these models but all of them will fit our battery box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e-\u003c\/strong\u003e Constructed from laser cut \u0026amp; CNC-formed A36 hot-rolled mild steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Battery box seams are TIG welded where necesssary for added rigidity\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Laser-cut \"SF\" logos on battery box and battery hold-down strap\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e- \u003c\/strong\u003eTemporary mounting hole utilizes an existing threaded location in the framerail (most Honda\/Acura applications) and pre-cut X-patterned cutouts facilitate ease of mounting and welding during installation\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Designed for batteries spec'd at 10.24” L x 7.20” H x 6.75” W (Other brand batteries that match this sizing should fit as well)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Detailed Installation instructions are included. Minor welding is required for secure installation.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090632966298,"sku":"SF-02-096","price":181.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/battery_box_6_s.jpg?v=1762291986"}],"url":"https:\/\/www.speedfactoryracing.net\/en-ca\/collections\/transmission-37.oembed","provider":"SpeedFactoryRacing","version":"1.0","type":"link"}