{"title":"Fuel Injectors","description":"\u003cp\u003e\u003c\/p\u003e","products":[{"product_id":"fuel-tech-peak-hold-pro-injector-driver","title":"FuelTech Peak \u0026 Hold Pro Injector Driver","description":"\u003cp\u003e\u003cspan\u003eFuelTech's Peak \u0026amp; Hold PRO FuelTech’s Peak \u0026amp; Hold PRO Injector Driver is an advanced module designed to control low impedance fuel injectors at a professional level, featuring 8 channels, 26-way automotive connector, and several integrated motor protections in case an injector or connection fails. It is capable of delivering 2 to 12 Amps of software-selected current per channel and has an internal temperature sensor, fault diagnosis, and protection against high temperature. The module is housed in an anodized aluminum and plastic case and allows firmware updates through CAN bus communication.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePeak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or connection fails.\u003c\/li\u003e\n\u003cli\u003eIn general, racing high-flow injectors use low impedance internal coils (with less than 7 Ohms resistance). That allows them to have a much shorter response time than a high impedance injector.\u003c\/li\u003e\n\u003cli\u003eThese lower impedance coils require a current control, starting with a higher current at opening stage (peak) and lower current when opened (hold), otherwise the injector can quickly warm up and burn.\u003c\/li\u003e\n\u003cli\u003eWith PRO Injector Driver it is possible to apply a higher initial current, allowing quick opening of the injector and then reduce the current to, in general, 1⁄4 the peak current.\u003c\/li\u003e\n\u003cli\u003eTherefore, reducing injector’s deadtime (time between the injector gets energized and effectively sprays fuel). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 channels\u003c\/li\u003e\n\u003cli\u003e2 to 12 Amps (Software selected current, by channel)\u003c\/li\u003e\n\u003cli\u003e0.5 to 3 Amps (Software selected current, by channel)\u003c\/li\u003e\n\u003cli\u003eAutomotive connector\u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor\u003c\/li\u003e\n\u003cli\u003eFault diagnosis (CAN)\u003c\/li\u003e\n\u003cli\u003eProtection against high temperature\u003c\/li\u003e\n\u003cli\u003eOutput for activating the injectors relay\u003c\/li\u003e\n\u003cli\u003eAluminum case\u003c\/li\u003e\n\u003cli\u003eAllows firmware update through CAN\u003c\/li\u003e\n\u003cli\u003eStandalone\u003c\/li\u003e\n\u003cli\u003eDimension: 3.54” x 1.77” x: 4.5”\u003c\/li\u003e\n\u003cli\u003eMaterial: Anodized Aluminum and Plastic\u003c\/li\u003e\n\u003cli\u003eWarranty: Worldwide 1 year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":44527643951258,"sku":"FT-3010008062","price":449.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":44527643984026,"sku":"FT-3010008062 \/ 2001007186","price":518.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/PHPRO_1024x1024_4819980a-9555-4dd2-a8c9-c896cbf798c4.png?v=1709966698"},{"product_id":"fuel-tech-peak-hold-8a-2a-driver","title":"FuelTech Peak \u0026 Hold 8A\/2A Driver","description":"\u003cp\u003e\u003cspan\u003eFuelTech’s Peak \u0026amp; Hold 8A\/2A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance below 1.5 ohm. Designed for use with low impedance fuel injectors. Mounting kit included. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e8A\/2A (Currently Viewing)\u003cbr\u003e\u003ca rel=\"noopener\" title=\"4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\" data-mce-href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\"\u003e4A\/1A\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener\" title=\"2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\" data-mce-href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\"\u003e2A\/0.5A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeak and Hold 8A\/2A (Currently Viewing)\u003cstrong\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e4 FT Injectors (1 per channel)\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" title=\"Peak and Hold 4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\"\u003ePeak and Hold 4A\/1A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" title=\"Peak and Hold 2A\/0.5A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" target=\"_blank\"\u003ePeak and Hold 2A\/0.5A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":44527654830234,"sku":"FT-3010003325","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":44527654863002,"sku":"FT-3010003325 \/ 2001000044","price":268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/pnh8a_1_1024x1024_96016f58-4cc9-459c-bde5-c6afb1aea0a4.jpg?v=1709967823"},{"product_id":"fuel-tech-peak-hold-4a-1a-driver","title":"FuelTech Peak \u0026 Hold 4A\/1A Driver","description":"\u003cp\u003e\u003cspan\u003eFuelTech’s Peak \u0026amp; Hold 4A\/1A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance between 1.5 to 3 ohms. The mounting kit is included. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" title=\"8A\/2A\" target=\"_blank\"\u003e8A\/2A\u003c\/a\u003e\u003cbr\u003e4A\/1A (Currently Viewing)\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" title=\"2A\/0.5A\" target=\"_blank\"\u003e2A\/0.5A\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" title=\"Peak and Hold 8A\/2A\" target=\"_blank\"\u003ePeak and Hold 8A\/2A\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e8 FT Injectors\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePeak and Hold 4A\/1A (Currently Viewing)\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-2a-0-5a-driver\" title=\"Peak and Hold 2A\/0.5A\" target=\"_blank\"\u003ePeak and Hold 2A\/0.5A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":44527657844890,"sku":"FT-3010003324","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":44527657877658,"sku":"FT-3010003324 \/ 2001000044","price":248.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/P_H_aplicado_2_1024x1024_7418a24e-8f1f-4eb3-8f45-8b59d99320ff.png?v=1709968268"},{"product_id":"fuel-tech-peak-hold-2a-0-5a-driver","title":"FuelTech Peak \u0026 Hold 2A\/0.5A Driver","description":"\u003cp\u003e\u003cspan\u003eFuelTech’s Peak \u0026amp; Hold 2A\/0.5A Injector Driver is a 4-channel low impedance driver unit that controls up to 4 injectors with impedance between 3 and 7 ohms. The mounting kit is included.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent control driver for low impedance injectors\u003c\/li\u003e\n\u003cli\u003e4 channels\u003c\/li\u003e\n\u003cli\u003eAvailable in three current versions:\u003cbr\u003e\u003ca rel=\"noopener\" title=\"8A\/2A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" target=\"_blank\"\u003e8A\/2A\u003c\/a\u003e \u003cbr\u003e\u003ca rel=\"noopener\" title=\"4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\"\u003e4A\/1A\u003c\/a\u003e\u003cbr\u003e2A\/0.5A (Currently Viewing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" title=\"Peak and Hold 8A\/2A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver?variant=26302636995\" target=\"_blank\"\u003ePeak and Hold 8A\/2A\u003c\/a\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with impedance below 1.5 ohm\u003c\/li\u003e\n\u003cli\u003e8 FT Injectors\u003c\/li\u003e\n\u003cli\u003e16 Bosch 160lb\/h (1600cc) injectors (4 per channel)\u003c\/li\u003e\n\u003cli\u003e8 Siemens low impedance injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" title=\"Peak and Hold 4A\/1A\" href=\"https:\/\/fueltech-usa.myshopify.com\/collections\/peak-hold\/products\/peak-and-hold-4a-1a-driver\" target=\"_blank\"\u003ePeak and Hold 4A\/1A\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 1.5 to 3 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e8 Bosch 160lb\/h (1600cc) injectors (2 per channel)\u003c\/li\u003e\n\u003cli\u003e4 Siemens 83lb\/h injectors\u003c\/li\u003e\n\u003cli\u003e4 MSD injectors (with 2 ohms impedance per injector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePeak and Hold 2A\/0.5A (Currently Viewing)\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControls up to 4 injectors with 3 to 7 ohms of impedance\u003c\/li\u003e\n\u003cli\u003e4 Bosch 160lb\/h (1600cc) injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions: 115 x 90 x 33mm\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"w\/o harness","offer_id":44527659417754,"sku":"FT-3010003323","price":239.0,"currency_code":"USD","in_stock":true},{"title":"w\/ 6ft unterminated harness","offer_id":44527659450522,"sku":"FT-3010003323 \/ 2001000044","price":248.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/pnh2a_1_1024x1024_04004628-330a-4ba5-9bbc-95c4841b9b86.jpg?v=1709968668"},{"product_id":"fuel-tech-ft-injector-80-lb-h","title":"FuelTech Ft Injector 80 Lb\/H","description":"\u003cp\u003e\u003cspan\u003eThe FT Injector 80 lb\/hr (840 cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoil resistance: (\u003cspan data-mce-fragment=\"1\"\u003e8.2 - 8.1\u003c\/span\u003e) Ohms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":44527728754842,"sku":"FT-5010113193","price":204.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":44527728787610,"sku":"FT-5010113193-4","price":736.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":44527728820378,"sku":"FT-5010113193-8","price":1472.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Highimpedance-801_1024x1024_4aae77c7-64b6-47c5-a2d0-5fdbeda7efdc.png?v=1709973108"},{"product_id":"fuel-tech-ft-injector-120-lb-h","title":"FuelTech Ft Injector 120 Lb\/H","description":"\u003cp\u003e\u003cspan\u003eThe FT Injector 120 lb\/hr (1,260 cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoil resistance: (\u003cspan data-mce-fragment=\"1\"\u003e8.2 - 8.1\u003c\/span\u003e) Ohms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":44527731376282,"sku":"FT-5010113192","price":209.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":44527731409050,"sku":"FT-5010113192-4","price":756.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":44527731441818,"sku":"5010113192-8","price":1512.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Highimpedance-1201_1024x1024_4d691902-67fc-408c-9ba7-679365542b3d.png?v=1709973643"},{"product_id":"fuel-tech-ft-injector-170-lb-h","title":"FuelTech FT Injector 170 lb\/h","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 170 lb\/hr (1785cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCoil resistance: (8.2 - 8.1) Ohms\u003c\/li\u003e\n\u003cli\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Set of 4","offer_id":44572971204762,"sku":"FT-5010110882-4","price":796.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":44572971237530,"sku":"FT-5010110882-8","price":1592.0,"currency_code":"USD","in_stock":true},{"title":"Individual","offer_id":44574103109786,"sku":"FT-5010110882","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Highimpedance-1701_1024x1024_c03c1810-2b32-4747-8de9-23bedf61535a.png?v=1710923162"},{"product_id":"fuel-tech-ft-injector-240-lb-h","title":"FuelTech FT Injector 240 lb\/h","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 240 lb\/hr (2520cc\/min @ 43.5 psi) is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders.\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used.\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHigh impedance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCoil resistance: (8.2 - 8.1) Ohms\u003c\/li\u003e\n\u003cli\u003eIngress protection Rating: IP67 \/ NEMA6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":44572980871322,"sku":"FT-5010110883","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":44572980904090,"sku":"FT-5010110883-4","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Set of 8","offer_id":44572980936858,"sku":"FT-5010110883-8","price":1992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Highimpedance-2401_1024x1024_866f122a-dba3-4814-947b-bf345892ec05.png?v=1710923675"},{"product_id":"fuel-tech-ft-injector-320-lb-h","title":"FuelTech Ft Injector 320 Lb\/H - Fuel Injector","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 320 lb\/hr (2,226 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca title=\"FuelTech Peak \u0026amp; Hold 8A\/2A Injector Driver product page\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" data-mce-fragment=\"1\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003ca title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\" href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" data-mce-fragment=\"1\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/-4AN \/ Individual","offer_id":44573014392986,"sku":"FT-5010108747","price":319.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":44573014425754,"sku":"FT-5010108747-4","price":1276.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":44573014458522,"sku":"FT-5010108747-8","price":2552.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":44573014524058,"sku":"FT-5010108749","price":319.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":44573014556826,"sku":"FT-5010108749-4","price":1276.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":44573014589594,"sku":"FT-5010108749-8","price":2552.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Lowimpedance-3201_1024x1024_1a48fe4a-1d8f-4e9a-93bb-49825e68efc6.png?v=1710925616"},{"product_id":"fuel-tech-ft-injector-520-lb-h","title":"FuelTech FT Injector 520 lb\/h","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 520 lb\/hr (3,822 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injector Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44573032775834,"sku":"FT-5010107881","price":379.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44573032808602,"sku":"FT-5010107881-4","price":1356.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44573032841370,"sku":"FT-5010107881-8","price":2712.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Individual","offer_id":44573032874138,"sku":"FT-5010108245","price":375.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":44573032906906,"sku":"FT-5010108245-4","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":44573032939674,"sku":"FT-5010108245-8","price":3000.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":44573032972442,"sku":"FT-5010108244","price":375.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":44573033005210,"sku":"FT-5010108244-4","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":44573033037978,"sku":"FT-5010108244-8","price":3000.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Individual","offer_id":44972620087450,"sku":"FT-5010108249","price":375.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Set of 4","offer_id":44972620120218,"sku":"FT-5010108249-4","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Set of 8","offer_id":44972620152986,"sku":"FT-5010108249-8","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/DSC06302-HDR_1024x1024_7a441be2-269b-46d9-b766-5f3453a08370.jpg?v=1710926734"},{"product_id":"fuel-tech-ft-injector-720-lb-h","title":"FuelTech FT Injector 720 lb\/h","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 720 lb\/hr (5,449 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injector Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44573264314522,"sku":"FT-5010107883","price":419.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44573264347290,"sku":"FT-5010107883-4","price":1516.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44573264412826,"sku":"FT-5010107883-8","price":3032.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Individual","offer_id":44573264445594,"sku":"FT-5010108235","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 4","offer_id":44573264511130,"sku":"FT-5010108235-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-4AN \/ Set of 8","offer_id":44573264543898,"sku":"FT-5010108235-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Individual","offer_id":44573264609434,"sku":"FT-5010108234","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 4","offer_id":44573264642202,"sku":"FT-5010108234-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB \/ Set of 8","offer_id":44573264707738,"sku":"FT-5010108234-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Individual","offer_id":44573264740506,"sku":"FT-5010108238","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Set of 4","offer_id":44573264806042,"sku":"FT-5010108238-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/-6ORB\/TIP45 \/ Set of 8","offer_id":44573264838810,"sku":"FT-5010108238-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Individual","offer_id":44972619923610,"sku":"FT-5010108239","price":415.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Set of 4","offer_id":44972619956378,"sku":"FT-5010108239-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"'-4AN\/-6ORB \/ Set of 8","offer_id":44972619989146,"sku":"FT-5010108239-8","price":3320.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Individual","offer_id":44573265035418,"sku":"FT-5010108237","price":415.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Set of 4","offer_id":44573265068186,"sku":"FT-5010108237-4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/TIP45 \/ Set of 8","offer_id":44573265133722,"sku":"FT-5010108237-8","price":3320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Websiteimages-Lowimpedance-7201_1024x1024_727023c8-1d83-4340-b828-cee95e2f7397.png?v=1710930376"},{"product_id":"fuel-tech-ft-injector-820-lb-h","title":"FuelTech FT Injector 820 lb\/h","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe FT Injector 820 lb\/hr (5,880 cc\/min @ 43.5 psi) is a low impedance, 1.5 Ohms, fuel injector from the FT Injector family. A Peak \u0026amp; Hold Driver, such as the \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\" title=\"FuelTech 8A\/2A Peak \u0026amp; Hold Injection Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-and-hold-8a-2a-driver\"\u003e8A\/2A Peak \u0026amp; Hold Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\" title=\"FuelTech Peak \u0026amp; Hold PRO Injector Driver product page\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.fueltech.net\/collections\/peak-hold\/products\/peak-hold-pro-driver\"\u003ePeak \u0026amp; Hold PRO Injector Driver\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e, is required. FT Injectors are compatible with any ECU and all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE). Featuring EV1 connectors with silver plated terminals for superior conductivity and corrosion resistant internal components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders\u003c\/li\u003e\n\u003cli\u003eIt has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw material used\u003c\/li\u003e\n\u003cli\u003eReduce the number of injectors, connections and hoses in your project;\u003c\/li\u003e\n\u003cli\u003eCompatible with any type of fuel (Gasoline, Ethanol, nitromethane, nitropropane, MTBE and ETBE)\u003c\/li\u003e\n\u003cli\u003eTested and approved on +4,000 horsepower engines\u003c\/li\u003e\n\u003cli\u003eCompatible with any ECU on the market\u003c\/li\u003e\n\u003cli\u003eUse outputs from your ECU (by reducing the number of injectors)\u003c\/li\u003e\n\u003cli\u003eFuelTech warranty and support\u003c\/li\u003e\n\u003cli\u003eProject developed prioritizing the quality and durability of the injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Description:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow impedance: 1.5 Ohms\u003c\/li\u003e\n\u003cli\u003eIt is necessary to use an 8A\/2A Peak and Hold driver\u003c\/li\u003e\n\u003cli\u003eVoltage limit: up to 24V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FuelTech","offers":[{"title":"O-Ring\/O-Ring \/ Individual","offer_id":44573558145178,"sku":"FT-5010109129","price":439.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 4","offer_id":44573558177946,"sku":"FT-5010109129-4","price":1756.0,"currency_code":"USD","in_stock":true},{"title":"O-Ring\/O-Ring \/ Set of 8","offer_id":44573558210714,"sku":"FT-5010109129-8","price":3512.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/FT_Injector_820_1_1024x1024_df35f9c0-f3bb-4551-8397-bde81eb1c81e.png?v=1710930786"},{"product_id":"fuel-tech-ft-injector-o-ring-replacement","title":"FuelTech FT Injector O-Ring Replacement","description":"\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpper - \u003cspan data-mce-fragment=\"1\"\u003e(7.52 x 3.53)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLower - \u003cspan data-mce-fragment=\"1\"\u003e(7.59 x 2.62)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach Low Impedance FT Injector (320 lb\/h, 520 lb\/h, 720 lb\/hr \u0026amp; 820lb\/h) fits one upper o'ring and two lower o'rings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach High Impedance FT Injector (170 lb\/h \u0026amp; 240 lb\/h) fits two upper o'rings.\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Upper","offer_id":44605610885274,"sku":"FT-5010100460","price":4.0,"currency_code":"USD","in_stock":true},{"title":"Lower","offer_id":44605610918042,"sku":"FT-5010100461","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/O.RingBlack_1_1024x1024_d891c971-0e4b-430d-8485-82f7b57d46df.png?v=1711706536"},{"product_id":"fueltech-ft-injector-1020-lb-h-gen-2","title":"FT Injector 1020 lb\/h GEN 2","description":"\u003cp\u003eLow-impedance GEN 2 injector rated at 1020 lb\/hr (10,710 cc\/min at 90 PSI). Use a compatible Peak \u0026amp; Hold injector driver. EV1 electrical connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable options:\u003c\/strong\u003e Sets: Individual\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuelTech part numbers:\u003c\/strong\u003e FT-5010114197\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Individual","offer_id":67719823032687,"sku":"FT-5010114197","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/FuelTech-FT-Injector-1020-Fuel-Injector-Racing-w.jpg?v=1791581100"},{"product_id":"fueltech-fuel-injector-micro-filter","title":"FuelTech High Impedance Fuel Injector Micro Filter","description":"\u003cp\u003eFuel injector micro-filter replacement component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuelTech part numbers:\u003c\/strong\u003e FT-5018100848\u003c\/p\u003e","brand":"FuelTech","offers":[{"title":"Default Title","offer_id":67719823327599,"sku":"FT-5018100848","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/injectorfilter.jpg?v=1791581115"}],"url":"https:\/\/www.speedfactoryracing.net\/en-ca\/collections\/fuel-injectors.oembed?page=2","provider":"SpeedFactoryRacing","version":"1.0","type":"link"}