{"title":"Sensors\/Solenoids","description":"Here you will find sensors, sensor adapters, and related components.","products":[{"product_id":"speedfactory-4-bar-map-sensor-for-b-d-f-h-and-s2000","title":"SpeedFactory Racing 4 Bar MAP Sensor for B\/D\/F\/H and S2000 (1-43+PSI)","description":"\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan data-mce-fragment=\"1\"\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitments: B\/D\/F\/H Series Engines\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e94-01 Acura Integra\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e90-93 Acura Integra (will require 94-01 Integra Throttle Body)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-99 Acura CL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e01-03 Acura CL V6 (premium only)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e99-03 Acura TL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e88-00 Honda Civic All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e92-01 Honda Prelude All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e00-05 Honda S2000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e94-02 Honda Accord All 4 cyl Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e93-97 Honda Del Sol All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-01 Honda CR-V All Models\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":35088119300250,"sku":"SF-01-015","price":119.69,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":35088119365786,"sku":"SF-01-016","price":119.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/red4bar-new.jpg?v=1594261651"},{"product_id":"speedfactory-4-bar-map-sensor-for-k-series","title":"SpeedFactory Racing 4 Bar MAP Sensor for K Series (1-43+PSI)","description":"\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan data-mce-fragment=\"1\"\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003cbr\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market). \u003cbr\u003e* Automatic temperature compensation. \u003cbr\u003e* True linear scaling for perfect drivability at all boost and vacuum levels. \u003cbr\u003e* Compatible with all aftermarket engine management systems. \u003cbr\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. \u003cbr\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors. \u003cbr\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor. \u003cbr\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/p\u003e\n\u003cp\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitments:\u003c\/strong\u003e \u003cbr\u003eK20 and K24 engines using factory K Series Style MAP sensor\u003cbr\u003e2\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e006+ S2000\u003cbr\u003e2002+ CR-V\u003cbr\u003e2002+ RSX\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e2001+ EP-3\u003cbr\u003e2001-2005 Civic D17\u003cbr\u003e2006+ Civic Si\u003cbr\u003e2004-2008 TSX\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":35088120348826,"sku":"SF-01-017","price":119.69,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":35088120381594,"sku":"SF-01-018","price":119.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/red_k_s.jpg?v=1594261655"},{"product_id":"speedfactory-4-bar-map-sensor-k-series-new-style-civic-si-s2000-crz","title":"SpeedFactory Racing 4 Bar MAP Sensor K Series - 06-09 S2000, 06-11 Civic R18, 12-15 Civic Si, 2013+ILX, 09-10 TSX, CRZ (1-43+PSI)","description":"\u003cp\u003e\u003cspan class=\"mednormal\"\u003eSpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. \u003c\/span\u003e\u003cspan\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"mednormal\"\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e*Precisely calculates boost pressure from 1-43+ psi\u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitments:\u003cbr\u003e\u003c\/strong\u003e06-09 Honda S2000\u003cbr\u003e06-11 Civic R18\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e12-15 Civic Si\u003cbr\u003e2013+ ILX\u003cbr\u003e09-10 TSX\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e10-16 CR-Z\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Black","offer_id":36483328278682,"sku":"SF-01-027","price":119.69,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":36483328311450,"sku":"SF-01-028","price":119.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ii-02.jpg?v=1672437280"},{"product_id":"k-tuned-b-series-tps-adapter","title":"K-Tuned B-Series TPS Adapter","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned B-Series TPS Adapter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eK20A\/A2 and Z1 throttle body or K20A3 throttle body only from the Honda EP3. It also fits several aftermarket throttle bodies.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003cspan\u003eAdapter must be used with a Honda MPFI (Multi Point Fuel Injection) J3TR60659 TPS sensor. Also note that this sensor is found on several Honda models ranging in year from 1988 to 2001.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe recently decided it was time to offer our customers another option to help solve the TPS problem that continues to plague some K-Series owners. The K-Tuned B-Series TPS Adapter is a simple 2 piece adapter that makes it possible to use a 1988 to 2001 B-Series TPS on the RSX Type-S style K-Series throttle body. Note that this adapter can also be used on several aftermarket TB's as long as they were originally designed for the standard Type-S TPS. The mounting holes on both the K and B TPS are identical, so mounting is very simple using a billet aluminum spacer. For the actual shaft to arm conversion, we designed a small round adapter that bolts to the shaft of the K throttle body with a set screw. This adapter piece has two posts on it that will hold the arm on the B-Series TPS. For wiring, we provide a female K-Series TPS plug and 3 terminals to connect to the B-Series TPS plug that is cut off the old engine harness. The idea here is to make an adapter so that you will not need to cut your K-Series engine harness. All that's left is calibration, which is just like all Honda TPS sensors, set the reading to 0.475 volts closed and the wide open reading should be approximately 4.5 volts. Our kit includes the 2 piece adapter, female TPS plug, 3 terminals and stainless steel hardware.\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088961896602,"sku":"KTD-KTD-TPS-BSA","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktd-tps-bsa.jpg?v=1594265266"},{"product_id":"k-tuned-rsx-fan-switch","title":"K-Tuned RSX Fan Switch","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned RSX Fan Switch - Used on K-swapped EF, EG, EK and DC2 chassis.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe OEM RSX fan switch is used to control the rad fan on your K-swapped vehicle. The sensor fits in the RSX or EP3 radiator, the K-Tuned swivel neck housing or use an inline adapter in the lower coolant hose. This sensor will trigger the fan on at 95F\/204C (factory spec)\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088962322586,"sku":"KTD-KT-FAN-STH","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/fanswitch.jpg?v=1594265271"},{"product_id":"k-tuned-coolant-temp-sensor-for-dash-cluster","title":"K-Tuned Coolant Temp Sensor (For Dash Cluster)","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned Coolant Temp Sensor (For Dash Cluster) - Used on K-swapped EF, EG, EK and DC2 chassis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis simple one wire sensor is needed on all K-swapped EF, EG, EK and DC2 chassis. It allows the coolant temperature reading to be properly displayed on the dash gauge cluster. Be sure to pick up our K-Tuned coolant temp sensor adapter so the sensor can be installed easily in the upper coolant neck.\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088964878490,"sku":"KTD-KTD-18-CTS","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktd-18-cts_1.jpg?v=1594265277"},{"product_id":"speedfactory-3-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Kit","description":"\u003cp\u003eThe SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate. (For higher boost levels and better off-the-line boost control please see our 4 Port Boost Control Solenoid Kit).\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product can be used with internal or external wastegates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e34Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003eFinding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpeedFactory 3-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (2) 1\/8\" x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-3-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253)566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"3-Port Solenoid Only","offer_id":35089932877978,"sku":"SF-01-051","price":117.59,"currency_code":"USD","in_stock":true},{"title":"3-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089932845210,"sku":"IG SF-01-051 + SF-01-051-B","price":130.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/3_port_logo_2.jpg?v=1594268866"},{"product_id":"speedfactory-4-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 4-Port Boost Control Solenoid Kit (External Wastegates Only)","description":"\u003cp\u003eThe SpeedFactory Racing 4-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 6-7 times the spring pressure of the wastegate and offers very precise control at very high boost levels.\u003c\/p\u003e\n\u003cp\u003eThe 4 Port Solenoid also allows you to use much lower wastegate spring pressures for better boost control when launching .\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product is for use with external wastegates only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e25Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003e4 port solenoids are more sensitive than 3 port solenoids and finding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpeedFactory 4-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (3) 1\/8\" NPT x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-4-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253) 566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"4-Port Solenoid Only","offer_id":35089935073434,"sku":"SF-01-052","price":139.64,"currency_code":"USD","in_stock":true},{"title":"4-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089935040666,"sku":"IG SF-01-052 + SF-01-052-B","price":151.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/4_port_logo_s.jpg?v=1594268871"},{"product_id":"k-tuned-k-series-knock-sensor-with-plug","title":"K Tuned K Series Knock Sensor with Plug","description":"\u003cp\u003eApplication: All K-Series except new K24Z-Series\u003c\/p\u003e\u003cp\u003eMany K-Series cars come with a very brittle and easily broken knock sensor. If you have worked on your car and tried to unplug the sensor chances are you've broken it. The plastic body becomes very weak from the heat and often cracks or breaks easily. We are providing a better alternative with our knock sensor with pigtail. This can easily be wired into your and doesn't require any modification to the ECU. The readings and output are the same as factory.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35090185683098,"sku":"KTD-KTD-KNK-300","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktd-knk-300_001.jpg?v=1594269892"},{"product_id":"blox-racing-throttle-position-sensors","title":"Blox Racing Throttle Position Sensors","description":"\u003cp class=\"p1\"\u003e\u003cstrong\u003eBlox Racing Throttle Position Sensors\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe throttle position sensor (TPS) is basically a \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Potentiometer\"\u003e\u003cspan class=\"s1\"\u003epotentiometer\u003c\/span\u003e\u003c\/a\u003e that provides a variable \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Resistor\"\u003e\u003cspan class=\"s1\"\u003eresistance\u003c\/span\u003e\u003c\/a\u003e dependent upon the position of the throttle.  There are many different instances when one needs to be replaced.    Consequently, in order to purchase a replacement your only options were to buy a brand new throttle body assembly from the local Honda dealer or to find a used one from a local junk yard.\u003c\/p\u003e\u003cp class=\"p2\"\u003eHowever, BLOX Racing offers an economical solution for replacement throttle position sensors.  All BLOX Racing TPS are brand new and are provided with a gasket.\u003c\/p\u003e\u003cp class=\"p2\"\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eTPS not available for Honda single point ignition systems.\u003c\/span\u003e\u003c\/p\u003e","brand":"Blox","offers":[{"title":"Honda B\/D\/H\/F Series Engines - Except Dual Point","offer_id":35090393530522,"sku":"BXIM-10400","price":50.4,"currency_code":"USD","in_stock":true},{"title":"2003-2005 Honda Accord; 2003-2006 Honda Element","offer_id":35090393694362,"sku":"BXIM-10403","price":62.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/bxim-10401.jpg?v=1746218894"},{"product_id":"speedfactory-racing-tps-throttle-position-sensor-b-d-h-f-series-engines","title":"SpeedFactory Racing (TPS) Throttle Position Sensor - B\/D\/H\/F Series Engines","description":"\u003cp\u003eThis is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-Year Warranty from original date of purchase.\u003c\/p\u003e\u003cp\u003eEngine Compatibility: Honda\/Acura B-Series, D-Series, H-Series, and F-Series (Accord Only)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e**IMPORTANT NOTE:\u003c\/strong\u003e Please make sure to use the provided gasket to seal out moisture from harming the sensor's internal circuitry.**\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090859983002,"sku":"SF-01-101","price":59.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/tps_sensor_final_s.jpg?v=1594273151"},{"product_id":"gp1-racing-strain-shift-knobs","title":"GP1 Racing Strain Shift Knobs","description":"\u003cp data-mce-fragment=\"1\"\u003eGP1 Racing Strain Knobs feature state of the art technology and have been used for many years in several well-known drag cars. Simply install this shift knob then wire in the power\/ground\/signal wires to the ECU, and set up the input in your EMS system to trigger an ignition cut for easy, seamless full-throttle clutchless upshifting!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis system works great for either rod or cable-actuated shifters such as your common Honda\/Acura B-Series or K-Series cars. We use the 2.5V Reference Amplifier Module option as most standalone EMS will easily accept a 0-5V trigger range. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2.5v Resting Voltage for Motec, AEM, Haltech, Fuel Tech, etc.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e±0.5% Accuracy\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5V or 8-16V Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOptions:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThread Pitch (m10x1.50 OEM Honda Thread Pitch)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThread Pitch (7\/16×20 G-Force Thread Pitch)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: When using 5v output resting voltage will read under 2V.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSetup Instructions: AEM V2, AEM Infinity, Motec M1, Fueltech, and More.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"CLICK HERE FOR FULL STRAIN KNOB SETUP INSTRUCTIONS\" href=\"https:\/\/www.dropbox.com\/s\/t4bo5iisenrztot\/GP1-Strain-Setup-and-Setting-Document-Rev-d.pdf?dl=0\"\u003eCLICK HERE FOR FULL SETUP INSTRUCTIONS!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003ePlease call or email our knowledgeable staff if you have any questions before placing your order. Support@speedfactoryracing.net or (253)566-4331.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eKeywords: Flatshifter, Strain Gauge, Clutchless Shifting, Strain\u003c\/span\u003e\u003c\/p\u003e","brand":"GP1 Racing","offers":[{"title":"OEM Honda (M10 x 1.50)","offer_id":41081460916378,"sku":"GP1-HONDA-STRAIN","price":925.0,"currency_code":"USD","in_stock":true},{"title":"G-Force (7\/16 x 20)","offer_id":41081460949146,"sku":"GP1-HONDA-STRAIN-GFORCE","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/GP1Strain2.jpg?v=1633985828"},{"product_id":"hondata-ctr-maf-500","title":"Hondata CTR MAF 500","description":"\u003cdiv class=\"tab-pane active\" id=\"tab-description\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eThis sensor replaces your FK2\/FK8 MAF sensor to increase the MAF air metering range from 300 g\/s to 500 g\/s. With a stock MAF you will reach the maximum range with a stock turbo, airbox and bolt-ons. When this happens the fueling becomes inaccurate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eThe Hondata CTR MAF 500 accurately measures 60% more air with the stock airbox, which allows you to tune up to around 640 hp. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eInstallation involves unplugging the stock sensor and re-using the same two phillips screws to install the new sensor. A FlashPro modification file is provided with this sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eA must-have bolt on for the Civic Type R. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hondata","offers":[{"title":"Default Title","offer_id":41673799598234,"sku":"HDA-CTR-MAF-500","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/hondata-ctr-maf-500-sml-500x500.jpg?v=1645566465"},{"product_id":"denso-honda-acura-k-series-premium-direct-ignition-coil-packs","title":"Denso Honda\/Acura K-Series Premium Ignition Coil Packs, Set of 4","description":"\u003cp\u003e\u003cstrong\u003eSet of 4\u003c\/strong\u003e brand new genuine Denso Honda\/Acura K-series direct ignition coil packs!\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDenso's proven ignition coils maximize performance and efficiency through consistent high-energy output.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese premium coils are compatible with B-series engines using our Coil-On-Plug conversion kits, found\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/engine-and-billet-parts\/billet-parts\/speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits-15304\" style=\"color: #ff2a00;\" data-mce-href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/engine-and-billet-parts\/billet-parts\/speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits-15304\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible K-series vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 Civic Si\u003c\/li\u003e\n\u003cli\u003e2006-2011 Civic Si\u003c\/li\u003e\n\u003cli\u003e2002-2006 RSX (all models)\u003c\/li\u003e\n\u003cli\u003e2004-2008 TSX\u003c\/li\u003e\n\u003cli\u003e2003+ Accord (4 cyl)\u003c\/li\u003e\n\u003cli\u003e2002-present CRV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":42018479210650,"sku":"IG DENSO 673-2301","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/DensoCoilsLogo.jpg?v=1653596189"},{"product_id":"speedfactory-map-sensor-3-bar-06-09-s2000-r18-2012-si-2013-ilx-09-10-tsx-crz","title":"SpeedFactory Racing 3 Bar MAP Sensor K Series - 06-09 S2000, 06-11 Civic R18, 12-15 Civic Si, 2013+ILX, 09-10 TSX, CRZ (1-29+PSI)","description":"\u003cp\u003e\u003cspan\u003eSpeedFactory 3 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e*Precisely calculates boost pressure from 1-29+ psi\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitments:\u003cbr\u003e\u003c\/strong\u003e06-09 Honda S2000\u003cbr\u003e06-11 Civic R18\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e12-15 Civic Si\u003cbr\u003e2013+ ILX\u003cbr\u003e09-10 TSX\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e10-16 CR-Z\u003c\/span\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":42933743288474,"sku":"SF-01-026","price":119.69,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42933743321242,"sku":"SF-01-025","price":119.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ii-01.jpg?v=1672437222"},{"product_id":"speedfactory-k-series-tps","title":"SpeedFactory Racing K-Series TPS Sensor (Base Model RSX \u0026 CRV)","description":"\u003cp\u003eThis is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-Year Warranty from original date of purchase.\u003c\/p\u003e\n\u003cp\u003eSensor Compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2006 Acura RSX Base Model\u003c\/li\u003e\n\u003cli\u003e2002-2004 Honda CRV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**IMPORTANT NOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePlease make sure to use the provided gasket to seal out moisture from harming the sensor's internal circuitry.**\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":52301387432303,"sku":"SF-01-102","price":59.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/fixedk3_d6bd8c3f-0354-4d70-a3ea-49735b0d82bf.jpg?v=1760473934"},{"product_id":"speedfactory-racing-k-series-tps-sensor-rsx-type-s-02-05-honda-civic-si-hb","title":"SpeedFactory Racing K-Series TPS Sensor (RSX Type-S \u0026 02-05 Honda Civic Si HB)","description":"\u003cp\u003eThis is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-Year Warranty from original date of purchase.\u003c\/p\u003e\n\u003cp\u003eSensor Compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2006 Acura RSX Type-S\u003c\/li\u003e\n\u003cli\u003e2002-2005 Honda Civic Si HB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**IMPORTANT NOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePlease make sure to use the provided gasket to seal out moisture from harming the sensor's internal circuitry.**\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":52341095104879,"sku":"SF-01-103","price":59.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/fixedk3_d6bd8c3f-0354-4d70-a3ea-49735b0d82bf.jpg?v=1760473934"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/collections\/1694b974efa0b346d38da4084db6faaa.jpg?v=1594260300","url":"https:\/\/www.speedfactoryracing.net\/collections\/sensors.oembed?page=2","provider":"SpeedFactoryRacing","version":"1.0","type":"link"}