{"title":"Electronics","description":"\u003cp\u003eMobile Users: Please click on the arrows in the drop-down menus \u0026amp; click on the specific category of the product you are looking for.\u003c\/p\u003e\n\u003cp\u003eDesktop Users: Please hover over the category in the drop-down menus \u0026amp; click on the specific category of the product you are looking for.\u003c\/p\u003e","products":[{"product_id":"speedfactory-4-bar-map-sensor-for-b-d-f-h-and-s2000","title":"SpeedFactory Racing 4 Bar MAP Sensor for B\/D\/F\/H and S2000 (1-43+PSI)","description":"\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan data-mce-fragment=\"1\"\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitments: B\/D\/F\/H Series Engines\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e94-01 Acura Integra\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e90-93 Acura Integra (will require 94-01 Integra Throttle Body)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-99 Acura CL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e01-03 Acura CL V6 (premium only)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e99-03 Acura TL All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e88-00 Honda Civic All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e92-01 Honda Prelude All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e00-05 Honda S2000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e94-02 Honda Accord All 4 cyl Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e93-97 Honda Del Sol All Models\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e97-01 Honda CR-V All Models\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":35088119300250,"sku":"SF-01-015","price":105.33,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":35088119365786,"sku":"SF-01-016","price":105.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/red4bar-new.jpg?v=1594261651"},{"product_id":"speedfactory-4-bar-map-sensor-for-k-series","title":"SpeedFactory Racing 4 Bar MAP Sensor for K Series (1-43+PSI)","description":"\u003cp\u003eSpeedFactory 4 Bar MAP \u003cspan data-mce-fragment=\"1\"\u003e(Manifold Absolute Pressure) \u003c\/span\u003esensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e \u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003cbr\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market). \u003cbr\u003e* Automatic temperature compensation. \u003cbr\u003e* True linear scaling for perfect drivability at all boost and vacuum levels. \u003cbr\u003e* Compatible with all aftermarket engine management systems. \u003cbr\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. \u003cbr\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors. \u003cbr\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor. \u003cbr\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/p\u003e\n\u003cp\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitments:\u003c\/strong\u003e \u003cbr\u003eK20 and K24 engines using factory K Series Style MAP sensor\u003cbr\u003e2\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e006+ S2000\u003cbr\u003e2002+ CR-V\u003cbr\u003e2002+ RSX\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan class=\"mednormal\"\u003e2001+ EP-3\u003cbr\u003e2001-2005 Civic D17\u003cbr\u003e2006+ Civic Si\u003cbr\u003e2004-2008 TSX\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":35088120348826,"sku":"SF-01-017","price":105.33,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":35088120381594,"sku":"SF-01-018","price":105.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/red_k_s.jpg?v=1594261655"},{"product_id":"omnipower-usa-tachometer-for-92-95-honda-civic-eg","title":"Omnipower USA Tachometer for 92-95 Honda Civic EG","description":"\u003cp\u003eOmni Power USA replacement tachometers are unique because they fit directly into the factory cluster and require no wiring or custom mounting. This feature allows the vehicle to maintain a factory appearance, with a more accurate and higher RPM capability. \u003cbr\u003e\u003cbr\u003eOmni Power developed their own software in house to run the modern digital gear driven stepper motor. This was crucial to ensure the tachometer is accurate and has fast enough movement to keep up with highly responsive high revving engines. We use the same digital gear driven stepper motor as Porsche and other exotic automobiles. \u003cbr\u003e\u003cbr\u003eThe OEM Honda EF,EG,EK, and DC tachometer is not accurate. They typically read about 200-600 RPM fast at engine speeds above 7000 RPM. To maintain precise accuracy at all times, Omni Power developed a special monitoring software that ensures that their tachometer will be accurate at all times. \u003cbr\u003e\u003cbr\u003eEach tachometer is manufactured in the USA. Assembly, programming and testing are done in house, to ensure the highest level of quality.\u003c\/p\u003e\n\u003cp\u003e***Only fits USDM Gauge Clusters***\u003c\/p\u003e","brand":"Omnipower USA","offers":[{"title":"Default Title","offer_id":35088290218138,"sku":"OMNI-EG-TACH","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/files\/Screenshot2024-05-30at10.42.14AM.jpg?v=1717091120"},{"product_id":"hondata-s300-v3","title":"Hondata S300 Version 3 Tuning Software \u0026 Packages","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0707;\"\u003e**DOES NOT INCLUDE ECU**\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eNOTE: WE DO NOT OFFER S300 INSTALLATION SERVICES INTO YOUR ECU.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe are proud to offer Hondata's top of the line tuning products like the Hondata S300 V3 to our valued customers. The S300 is one of the most advanced OBD1 Honda \/ Acura tuning systems on the market. It offers superior tunability with forced induction support, datalogging, boost control capabilities, and so much more. Below is a brief summary from Hondata. If you have more questions on whether or not this system is right for you, please don't hesitate to contact us.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach Hondata S300 system sold by us at SpeedFactory Racing has it's own unique serial number from Hondata. This not only verifies it's authenticity, but is extremely useful for recovering your Hondata unit in the event of theft.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNOTE: We always recommend using the latest version of Smanager with the S300 System. You can download Smanager for free on the Hondata website.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e* Fits the following OBD1 USDM ECU's: P05,P06,PR4,P28,P30,P61,P72,P75\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000; font-size: medium;\"\u003e**Please allow 72hours for your order to process and ship**\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits inside the ECU\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade in USA \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt-in Bluetooth compatability\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWorks with Hondata Mobile iOS and Android app\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUSB connection for speed and compatibility \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSManager Windows based software for parameter \u0026amp; table editing, calibration uploading and datalogging.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReal-time updating of ECU \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt in calibrations for common engine combinations\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBuilt in datalogging to a laptop \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOn board datalogging memory (2 MB memory, 20-60 minutes datalogging) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustment for different sized injectors, with overall fuel trim. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConfigurable for any MAP sensor (to at 5 Bar and above)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTPS based table lookup for ITBs \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEngine protection from over boost. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eExpanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLaunch control with anti-lag \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFull throttle shift \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThree multi purpose outputs for nitrous control or similar Supports lambda tracing from a wideband o2 (PLX wideband recommended) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePWM output for boost control \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDual tables for high\/low octane calibrations etc. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTwo analog inputs for wideband, EGTs etc. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSManager editing software features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCompatable with Windows XP, Windows Vista, and Windows 7\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh and low speed 24 x 20 ignition and fuel tables for correct VTEC tuning\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInjector size fuel trim \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFuel trim for starting, throttle tip in and individual cylinder trim \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRev limiter with fuel cut or fuel and ignition cut \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLaunch control with anti-lag \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFull throttle shift \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable VTEC window with load and throttle control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSecondary intake runner control \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable idle speed \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAP sensor type and calibration \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdjustable boost cut with hot and cold settings \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShift light \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eClosed loop control \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAir temperature compensation \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWater temperature compensation \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFuel and ignition correction based on gear \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA\/C shutoff conditions \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eClosed loop \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThree general purpose outputs for nitrous control, quad boost control or similar \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOn board datalogging trigger conditions \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNOTE: The s300 uses different connecting pins in the ECU from the s100\/s200, and also has a slot cut in the side for the USB connector, so the ECU must be modified for use with the s300. The s300 is made to fit in a full frame ECU case (US and most markets), so will not fit in a JDM ECU case.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB Connection:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe s300 uses a high speed USB connection for both programming calibrations and datalogging. No more USB\/serial connectors!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReal-time Update:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe s300 can be updated in real-time with the engine running without affecting the operation of the vehicle. This means that calibrations and changes can be uploaded to the ECU very quickly (2 seconds for a new calibration, a fraction of a second for anything else), without interrupting the operation of the engine. Changes made in the SManager software are uploaded to the ECU instantly and you can see the effect immediately. The s300 does not use an EEPROM or equivalent, so you never need to open the ECU to change chips nor 'burn' ROMs. No EPROM programmer is necessary - you just need a laptop with USB port.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote that this the only true real-time update available for Honda ECUs. Any portion of the ECU (including the whole ROM) may be quickly updated with the engine running, without the engine stalling or going into limp mode.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDatalogging:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe s300 has datalogging to the SManager software built in via the USB port. Using a laptop the various ECU sensors can be datalogged, viewed, graphed and saved for later analysis.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAdditionally the s300 has on board flash memory which allows a datalog recordings to be made without a laptop, for later access and download to a laptop. Multiple recordings can be made and stored in the s300 for a total of around 40 minutes of total datalogging time. An external switch can be used to start and stop recordings, or engine conditions can trigger recording. For instance in a drag race, the s300 can be set to start recording once the rpm is bought up to near launch rpm and automatically stop once past the traps and the rpm drops below a certain level.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMAP Sensor Compatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAny linear MAP sensor can be used, using a scalar and offset to translate the MAP sensor characteristics into pressure. Popular MAP sensor settings are built in for ease of setup. To do this you will need the map sensor calibration numbers from the manufacturer of the sensor. For a trouble free installation, please take a look at the SpeedFactory 4 bar map sensor.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts sold by SpeedFactory Racing, whether specified or not, are sold for off-road use only. \u003cspan\u003eThese products are intended for racing vehicles which may never be used on a public road. \u003c\/span\u003e\u003cspan\u003eBy purchasing any aftermarket performance product from SpeedFactory Racing, the customer takes full responsibility for any use, and\/or misuse of the product and agrees that SpeedFactory Racing holds no responsibility for any consequences, legal or otherwise, of such use and\/or misuse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll performance modifications and installations are at the customer's own risk. SpeedFactory Racing holds no responsibility either implied or otherwise for mechanical, electrical, or other failure or when using any aftermarket performance products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hondata","offers":[{"title":"Hondata S300 V3 only","offer_id":35088378658970,"sku":"HDA-S300-V3","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/HONDATA-S30022_ee45cef2-f576-4674-99eb-03972ad4b505.jpg?v=1602624481"},{"product_id":"turbosmart-boost-gauge-0-2-bar-52mm-2-1-16","title":"Turbosmart Boost Gauge 0-2 BAR 52mm - 2 1\/16\"","description":"\u003cp\u003e\u003cstrong\u003eTurbosmart Boost Gauge 0-2 BAR 52mm - 2 1\/16\"\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eTurbosmart mechanical boost gauge is the perfect accessory for any of our Gated Boost Control Valves Featuring simple mechanical operation, a black face with silver bezel, bright backlighting and 0-2Bar range. All hook-up and panel mounting hardware included.\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":35088542007450,"sku":"TS-0101-2025","price":64.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ts-0101-2025.jpg?v=1594263634"},{"product_id":"xs-power-d680-battery","title":"XS Power D680 Battery","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XS Power D680 is a 12-volt deep cycle battery that is designed to be used as a primary power source in your racing vehicle (with charger only). It can also be used to provide supplemental power for your car audio system (used in series with a standard size battery), or can be used in marine applications.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.speedfactoryracing.net\/products\/xs-power-s680-battery\" title=\"XS Power S680 Battery\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\u003cstrong\u003eIf you are wanting a single small PRIMARY battery to \u003cspan style=\"text-decoration: underline;\"\u003echarge with your vehicle's alternator\u003c\/span\u003e, we recommend the XS POWER S680 - found here!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAbsorbent Glass Mat (AGM): XS Power's AGM (Absorbent Glass Mat) batteries use a fibrous material to suspend the liquid electrolyte against the lead plates. Because the electrolyte is absorbed in the material, there is little chance of an acid leak, even in the event the case is ruptured. AGM batteries contain more lead compared to traditional \"flooded\" batteries, thus producing more power.\u003c\/p\u003e\n\u003cp\u003eSpecifications: The D680 has the following specifications:\u003c\/p\u003e\n\u003cp\u003eMAX Amps: 1000 amps\u003cbr\u003eCranking Amps (at 32°F): 320 amps\u003cbr\u003eReserve Capacity: 28 minutes\u003cbr\u003eDischarge Capacity: 20 Ah (amp hours)\u003cbr\u003eDimensions: Length=7.13\", Height=6.57\", Width=3.03\"\u003cbr\u003eWeight: 15.42 pounds\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":35088556785818,"sku":"XSP D680","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/d680-front.jpg?v=1594263700"},{"product_id":"xs-power-d5100r","title":"XS Power D5100R","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOverview: The XS Power D5100R is a 12-volt battery that is designed to be used as a supplemental power source in your vehicle, or it can replace your vehicle's OEM battery. It can supply the power needed to run your high-powered audio system, better than a standard battery.\u003c\/p\u003e\u003cp\u003eNote: The D5100R is reverse polarity. For standard polarity, see D5100.\u003cbr\u003eTerminals Needed: This D-series battery does not come with battery terminals, so you will need to purchase the proper terminal adapters for your application before installation can take place:\u003c\/p\u003e\u003cp\u003eCar Stereo Installation: You will need terminal adapters that fit the inner diameter of your power ring terminals. Recommended terminal adapters include: Two 5\/16\" brass stud adapters (#589), Two 3\/8\" brass stud adapters (#590), Two 5\/16\" + Two 3\/8\" brass stud adapters (#588), or Two 3\/8\" zinc-plated steel stud adapters (#587). For dual-battery installations, a second battery install kit, such as the XS Power AK2500, can be used to connect the D5100R in parallel (+ to + and - to -) with the main battery.\u003cbr\u003eOEM Battery Replacement: The D5100R fits the BCI Group 51 vehicle applications and will fit many small imported vehicle applications. If you are installing the battery under the hood or replacing your vehicle's OEM battery, you will need either the Short Brass Post Adapters (#580) or the Long Brass Post Adapters (#586) to connect your battery cables. The 5100 Billet Aluminum Hold Down (#548) can also be used to install the battery under the hood.\u003cbr\u003eAbsorbent Glass Mat (AGM): XS Power's AGM (Absorbent Glass Mat) batteries use a fibrous material to suspend the liquid electrolyte against the lead plates. Because the electrolyte is absorbed in the material, there is little chance of an acid leak, even in the event the case is ruptured. AGM batteries contain more lead compared to traditional \"flooded\" batteries, thus producing more power.\u003c\/p\u003e\u003cp\u003eSpecifications: The D5100R has the following specifications:\u003c\/p\u003e\u003cp\u003eMAX Amps: 3100 amps\u003cbr\u003eCranking Amps (at 32°F): 745 amps\u003cbr\u003eReserve Capacity: 100 minutes\u003cbr\u003eDischarge Capacity: 60 Ah (amp hours)\u003cbr\u003eDimensions: Length=9.04\", Height=8.19\", Width=5.43\"\u003cbr\u003eWeight: 39.6 pounds\u003c\/p\u003e\u003ch1 class=\"product_title entry-title\"\u003e\u003cspan style=\"font-size: 12px;\"\u003ety\u003c\/span\u003e\u003c\/h1\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":35088556884122,"sku":"XSP D5100R","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/d5100r-front.jpg?v=1594263707"},{"product_id":"speedfactory-obd0-to-obd1-ecu-conversion-harness-multipoint-injection","title":"SpeedFactory Racing OBD0 (Vehicle) to OBD1 (ECU) Conversion Harness for Multi-Point Fuel Injection","description":"\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine.\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory OBD-0 to OBD-1 ECU Conversion Harness for Multi-Point Injection allows you to use a JDM or US OBD-1 M\/T ECU in an OBD-0 Chassis (88-91 Civic, CRX, or 90-91 Integra).\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eOur harness includes a 3’ pigtail and detailed instructions to simplify wiring for the sensors you need to properly complete your conversion. Wiring provisions include: 4-wire oxygen sensor, VTEC solenoid \u0026amp; pressure switch, knock sensor, and IAB solenoid (if applicable).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e88-91 Civic\/CRX HF\/Si\/EX Multi-Point fuel injection models (STD \u0026amp; DX models require additional wiring)\u003c\/p\u003e\n\u003cp\u003e90-91 Integra (all models)\u003c\/p\u003e\n\u003cp\u003eThere are additional parts required to complete your OBD-0 to OBD-1 conversion when using our harness that can also be purchased at SpeedFactory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Parts List:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeedFactory Racing OBD-0 MPFI (Vehicle) to OBD-1 (Distributor) Conversion Harness (\u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/conversion-harnesses\/speedfactory-racing-obd0-vehicle-to-obd1-distributor-conversion-harness\"\u003eAvailable Here!\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eOBD-1 distributor for your engine\u003c\/p\u003e\n\u003cp\u003eOBD-1 4-wire Oxygen Sensor\u003c\/p\u003e\n\u003cp\u003eOBD-1 Honda ECU\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35088613376154,"sku":"SF-01-043","price":77.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/obd0-obd1_2.jpg?v=1619563990"},{"product_id":"speedfactory-obd2b-to-obd1-ecu-jumper-harness","title":"SpeedFactory Racing OBD2B (Vehicle) to OBD1 (ECU) Conversion Harness","description":"\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine.\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Racing OBD2-B to OBD-1 Honda\/Acura ECU Conversion Harness \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in an OBD2-B vehicle (99-00 Civic, 99-00 CR-V, 00-01 Integra, and 00-01 Accord).\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35088613736602,"sku":"SF-01-042","price":77.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/obd2b-obd1_2.jpg?v=1594264153"},{"product_id":"speedfactory-obd2a-to-obd1-ecu-jumper-harness","title":"SpeedFactory Racing OBD2A (Vehicle) to OBD1 (ECU) Conversion Harness","description":"\u003cp\u003eThe use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine.\u003c\/p\u003e\n\u003cp\u003eThe SpeedFactory Racing OBD2-A to OBD-1 Honda\/Acura ECU Conversion harness \u003cspan class=\"GramE\"\u003eallows\u003c\/span\u003e you to use an OBD-1 Honda\/Acura M\/T ECU in an OBD-2A vehicle (96-98 Civic, Integra, Prelude, CR-V or Accord).\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side to your OBD-1 ECU and the other side into your factory engine harness.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35088617111706,"sku":"SF-01-041","price":77.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/obd2a-obd1_1.jpg?v=1594264009"},{"product_id":"speedfactory-4-bar-map-sensor-k-series-new-style-civic-si-s2000-crz","title":"SpeedFactory Racing 4 Bar MAP Sensor K Series - 06-09 S2000, 06-11 Civic R18, 12-15 Civic Si, 2013+ILX, 09-10 TSX, CRZ (1-43+PSI)","description":"\u003cp\u003e\u003cspan class=\"mednormal\"\u003eSpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. \u003c\/span\u003e\u003cspan\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"mednormal\"\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e*Precisely calculates boost pressure from 1-43+ psi\u003cbr\u003e* 40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Able to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Automatic temperature compensation.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* True linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Compatible with all aftermarket engine management systems.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Direct plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Each sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Requires proper sensor calibration with a programmable engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHondata \u0026amp; Neptune: Scalar: 838 Offset: 31\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitments:\u003cbr\u003e\u003c\/strong\u003e06-09 Honda S2000\u003cbr\u003e06-11 Civic R18\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e12-15 Civic Si\u003cbr\u003e2013+ ILX\u003cbr\u003e09-10 TSX\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e10-16 CR-Z\u003c\/span\u003e\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Black","offer_id":36483328278682,"sku":"SF-01-027","price":105.33,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":36483328311450,"sku":"SF-01-028","price":105.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ii-02.jpg?v=1672437280"},{"product_id":"k-tuned-eg-dc2-92-95-civic-94-01-integra-k-swap-conversion-harness","title":"K-Tuned EG \/ DC2 (92-95) Civic \/ (94-01) Integra K-Swap Conversion Harness","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned EG \/ DC2 (92-95) Civic \/ (94-01) Integra K-Swap Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088902979738,"sku":"KTD-KTH-EG-DC2","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kth-eg-dc2.jpg?v=1594265084"},{"product_id":"k-tuned-ek-1996-1998-civic-k-swap-conversion-harness","title":"K-Tuned EK (1996-1998) Civic K-Swap Conversion Harness","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned EK (1996-1998) Civic K-Swap Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088903209114,"sku":"KTD-KTH-96-98","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kth-96-98.jpg?v=1594265086"},{"product_id":"k-tuned-ek-1999-2000-civic-k-swap-conversion-harness","title":"K-Tuned EK (1999-2000) Civic K-Swap Conversion Harness","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned EK (1999-2000) Civic K-Swap Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088904814746,"sku":"KTD-KTH-99-00","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kth-99-00.jpg?v=1594265091"},{"product_id":"k-tuned-ef-1988-1991-civic-crx-k-swap-conversion-harness","title":"K-Tuned EF (1988-1991) Civic \/ CRX K-Swap Conversion Harness","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned EF (1988-1991) Civic \/ CRX K-Swap Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\u003cp\u003ePlease make sure to select your model. We need to know if you car was dual-point inject or multi-point injection. There is an adapter required for certain models. If you are unsure of your car feel free to contact us at us.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088906027162,"sku":"KTD-KTH-88-91","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kth-88-91_1.jpg?v=1594265093"},{"product_id":"k-tuned-em2-2001-2005-civic-k-swap-conversion-harness","title":"K-Tuned EM2 (2001-2005) Civic K-Swap Conversion Harness","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned EM2 (2001-2005) Civic K-Swap Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWe stepped into the wiring market for a reason. To release what we feel is the highest quality and easiest to install conversion harness available. We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered. Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car. It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly. Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install. The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection. Our harnesses come complete with installation instructions. The end result is a very high quality conversion harness at the best possible price. Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088906813594,"sku":"KTD-KTH-01-05","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kth-01-05.jpg?v=1594265096"},{"product_id":"k-tuned-immobilizer-multiplexor-bypass","title":"K-Tuned Immobilizer \/ Multiplexor Bypass","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned Immobilizer \/ Multiplexor Bypass\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 12px;\"\u003eWorks with 2001-2004 K\u0026amp;D ecus - PLM, PLR, PND, PNF, PRA, PRB \u0026amp; PPA\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe K-Tuned Immobilizer \/ Multiplexor Bypass unit is designed to allow the use of a stock K-series ecu in a swap application. This affordable option is very easy to install and disables both the immobilizer and the factory multiplexor system. This is a great alternative to other systems, which cost substantially more money. One more part that is making a K-swap a little more affordable.\u003c\/p\u003e\u003cp\u003eInstallation notes: Four wire installation, comes with two T-tap connectors for power and ground. The other two wires come with stock ecu pins in place for a quick installation once the un-used stock wires are removed.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088907010202,"sku":"KTD-KID-001","price":219.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kid-001.jpg?v=1594265098"},{"product_id":"k-tuned-b-series-tps-adapter","title":"K-Tuned B-Series TPS Adapter","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned B-Series TPS Adapter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eK20A\/A2 and Z1 throttle body or K20A3 throttle body only from the Honda EP3. It also fits several aftermarket throttle bodies.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003e\u003cspan\u003eAdapter must be used with a Honda MPFI (Multi Point Fuel Injection) J3TR60659 TPS sensor. Also note that this sensor is found on several Honda models ranging in year from 1988 to 2001.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe recently decided it was time to offer our customers another option to help solve the TPS problem that continues to plague some K-Series owners. The K-Tuned B-Series TPS Adapter is a simple 2 piece adapter that makes it possible to use a 1988 to 2001 B-Series TPS on the RSX Type-S style K-Series throttle body. Note that this adapter can also be used on several aftermarket TB's as long as they were originally designed for the standard Type-S TPS. The mounting holes on both the K and B TPS are identical, so mounting is very simple using a billet aluminum spacer. For the actual shaft to arm conversion, we designed a small round adapter that bolts to the shaft of the K throttle body with a set screw. This adapter piece has two posts on it that will hold the arm on the B-Series TPS. For wiring, we provide a female K-Series TPS plug and 3 terminals to connect to the B-Series TPS plug that is cut off the old engine harness. The idea here is to make an adapter so that you will not need to cut your K-Series engine harness. All that's left is calibration, which is just like all Honda TPS sensors, set the reading to 0.475 volts closed and the wide open reading should be approximately 4.5 volts. Our kit includes the 2 piece adapter, female TPS plug, 3 terminals and stainless steel hardware.\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088961896602,"sku":"KTD-KTD-TPS-BSA","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktd-tps-bsa.jpg?v=1594265266"},{"product_id":"k-tuned-rsx-fan-switch","title":"K-Tuned RSX Fan Switch","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned RSX Fan Switch - Used on K-swapped EF, EG, EK and DC2 chassis.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe OEM RSX fan switch is used to control the rad fan on your K-swapped vehicle. The sensor fits in the RSX or EP3 radiator, the K-Tuned swivel neck housing or use an inline adapter in the lower coolant hose. This sensor will trigger the fan on at 95F\/204C (factory spec)\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088962322586,"sku":"KTD-KT-FAN-STH","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/fanswitch.jpg?v=1594265271"},{"product_id":"k-tuned-coolant-temp-sensor-for-dash-cluster","title":"K-Tuned Coolant Temp Sensor (For Dash Cluster)","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned Coolant Temp Sensor (For Dash Cluster) - Used on K-swapped EF, EG, EK and DC2 chassis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis simple one wire sensor is needed on all K-swapped EF, EG, EK and DC2 chassis. It allows the coolant temperature reading to be properly displayed on the dash gauge cluster. Be sure to pick up our K-Tuned coolant temp sensor adapter so the sensor can be installed easily in the upper coolant neck.\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35088964878490,"sku":"KTD-KTD-18-CTS","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktd-18-cts_1.jpg?v=1594265277"},{"product_id":"xs-power-s680-battery","title":"XS Power S680 Battery","description":"\u003cp\u003eThe XS Power S680 is a 12-volt battery that is designed to be used as a primary power source in your racing vehicle with or without an alternator. We recommend this battery for builds using a factory alternator.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.speedfactoryracing.net\/products\/xs-power-d680-battery\" title=\"XS Power D680 Battery\" style=\"color: #2b00ff;\"\u003e\u003cem\u003e\u003cstrong\u003eIf you are wanting a single small PRIMARY racing battery to charge with a charger only, we recommend the XS POWER D680, found here!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDESCRIPTION\u003c\/h3\u003e\n\u003cp\u003e12V AGM Starting Battery, Max Amps 1,000A CA: 320A\u003cbr\u003e\u003cspan\u003eWeight Lbs.\u003c\/span\u003e – 15.42\u003cspan\u003e\u003cbr\u003eWeight Kgs.\u003c\/span\u003e – 7.0\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLength\u003c\/span\u003e – 7.13 in\u003cspan\u003e\u003cbr\u003eHeight\u003c\/span\u003e – 6.57 in\u003cspan\u003e\u003cbr\u003eWidth\u003c\/span\u003e – 3.03 in\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMAX Amps\u003c\/span\u003e – 1000\u003cspan\u003e\u003cbr\u003eCA\u003c\/span\u003e – 320A\u003cbr\u003e\u003cspan\u003eRC\u003c\/span\u003e – 28min.\u003c\/p\u003e\n\u003cp\u003e586 and M6 Terminal Hardware Included\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"3 Year Warranty\" href=\"http:\/\/www.4xspower.com\/XSpower-3YR-Warranty.pdf\" target=\"_blank\"\u003e\u003cspan\u003e3 Year Warranty\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":35089865605274,"sku":"XSP S680","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/s680-turn.jpg?v=1594268596"},{"product_id":"speedfactory-3-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 3-Port Boost Control Solenoid Kit","description":"\u003cp\u003eThe SpeedFactory Racing 3-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 2-3 times the spring pressure of the wastegate. (For higher boost levels and better off-the-line boost control please see our 4 Port Boost Control Solenoid Kit).\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product can be used with internal or external wastegates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e34Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003eFinding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSpeedFactory 3-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (2) 1\/8\" x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-3-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253)566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"3-Port Solenoid Only","offer_id":35089932877978,"sku":"SF-01-051","price":103.48,"currency_code":"USD","in_stock":true},{"title":"3-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089932845210,"sku":"IG SF-01-051 + SF-01-051-B","price":115.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/3_port_logo_2.jpg?v=1594268866"},{"product_id":"speedfactory-4-port-boost-control-solenoid-kit","title":"SpeedFactory Racing 4-Port Boost Control Solenoid Kit (External Wastegates Only)","description":"\u003cp\u003eThe SpeedFactory Racing 4-Port Boost Control Solenoid Kit allows precise boost control with a PWM (pulsewidth modulation) signal from a source (Engine Control Module or Electronic Boost Controller).\u003c\/p\u003e\n\u003cp\u003eThis solenoid can raise the boost level as high as 6-7 times the spring pressure of the wastegate and offers very precise control at very high boost levels.\u003c\/p\u003e\n\u003cp\u003eThe 4 Port Solenoid also allows you to use much lower wastegate spring pressures for better boost control when launching .\u003c\/p\u003e\n\u003cp\u003eThis kit can be used with single or multiple wastegates, and is compatible with almost every electronic boost controller and tuning software.\u003c\/p\u003e\n\u003cp\u003eThis product is for use with external wastegates only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e25Hz is our suggested starting point for control frequency in your EMS, and gives stable control in MOST setups\u003c\/strong\u003e. This is a maximum boost at 100% duty\/normally closed solenoid. \u003cspan style=\"background-color: #ffffff; color: #ff2a00;\"\u003e4 port solenoids are more sensitive than 3 port solenoids and finding the correct control frequency to achieve stable boost control for your particular EMS and setup is part of proper boost control tuning. \u003cem\u003eImproper control frequency will result in unstable boost control!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpeedFactory 4-Port Boost Control Solenoid Kit Features Include:\u003c\/p\u003e\n\u003cp\u003e-0-125 PSI pressure range\u003c\/p\u003e\n\u003cp\u003e- (3) 1\/8\" NPT x 1\/4\" barbed male fittings and (1) sintered muffler\u003c\/p\u003e\n\u003cp\u003e-24\" wires leads for easy install\u003c\/p\u003e\n\u003cp\u003e-Non-polarized wiring\u003c\/p\u003e\n\u003cp\u003e-Compatible with Haltech, Motec, Hondata, Neptune, AEM, Megasquirt, Holley, KTuner, and many more!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease see our simple installation diagram in the product images section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake your installation clean and easy with our Boost Control Solenoid Mounting Bracket, available \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/boost-control\/speedfactory-racing-4-port-boost-control-solenoid-bracket-with-hardware\"\u003ehere\u003c\/a\u003e!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to email us with any questions regarding this product at sales@speedfactoryracing.net or call us at (253) 566-4331.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"4-Port Solenoid Only","offer_id":35089935073434,"sku":"SF-01-052","price":122.88,"currency_code":"USD","in_stock":true},{"title":"4-Port Solenoid and Mounting Bracket (Strongly Recommended)","offer_id":35089935040666,"sku":"IG SF-01-052 + SF-01-052-B","price":133.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/4_port_logo_s.jpg?v=1594268871"},{"product_id":"hondata-traction-control","title":"Hondata Traction Control","description":"\u003cp\u003eTraction Control for your \u003ca href=\"https:\/\/www.hondata.com\/s300\"\u003es300\u003c\/a\u003e, \u003ca href=\"https:\/\/www.hondata.com\/kpro\"\u003eKPro\u003c\/a\u003e or \u003ca href=\"https:\/\/www.hondata.com\/flashpro\"\u003eFlashPro\u003c\/a\u003e. Hondata Traction Control works by monitoring the ABS wheel speed sensors and reducing engine output when excessive wheel-spin is detected. A dash mountable switch allows the selection of different target slip rates, and software allows the system to be tuned for your specific vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts sold through SpeedFactory Racing, whether specified or not, are sold for off-road use only. \u003cspan\u003eBy purchasing any aftermarket performance product from SpeedFactory Racing, the customer takes full responsibility for any use, and\/or misuse of the product and agrees that SpeedFactory Racing holds no responsibility for any consequences, legal, or other, of such use and\/or misuse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll performance modifications and installations are at the customer's own risk. SpeedFactory Racing holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. Items sold for off-road use only are illegal to use on public roads, in most states and provinces, even if your state does not perform testing.  These are intended for racing vehicles which may never be used on a public road.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable cellpadding=\"1\" cellspacing=\"0\" border=\"1\" id=\"table8\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"230\"\u003e\n\u003cp\u003e\u003cspan\u003eECU \/ EMS\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eCoverage\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"230\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hondata.com\/s300\"\u003eS300\u003c\/a\u003e (v1, v2 or v3)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAll ECUs \/ Models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"230\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hondata.com\/kpro-product\"\u003eKPro\u003c\/a\u003e (v1, v2, v3, or v4)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePRB \u0026amp; PRA ECUs including 2000-2005 S2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"230\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hondata.com\/flashpro\"\u003eFlashPro\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2006-2011 Civic Si, 2012+ Civic Si, 2013+ ILX, 2006+ Euro Civic Type R, 2006+ S2000, 07-08 TSX and 09-10 TSX, 07-08 TL.\u003cbr\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Hondata","offers":[{"title":"Default Title","offer_id":35089962893466,"sku":"HDA-TC","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/HONDATA_TractionCtrl2_500x500_4bcd8721-8536-4765-b6d9-7c310a272a2a.jpg?v=1602622908"},{"product_id":"hondata-coil-pack-retrofit-cpr","title":"Hondata Coil Pack Retrofit (CPR)","description":"\u003cp\u003eThe Hondata CPR comes with a wiring harness for your coil packs, a coil pack controller and fly leads for connecting to your distributor and ECU. The CPR is typically positioned next to the ECU inside the car.\u003c\/p\u003e\n\u003cdiv\u003eBenefits\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMore spark energy than a single coil, allowing a larger plug gap and fewer misfires.\u003c\/li\u003e\n\u003cli\u003eIndividual coils are more durable and less likely to fail than the stock igniter and coil.\u003c\/li\u003e\n\u003cli\u003eAdditionally, the Coil Pack Retrofit can drive a CDI controller if desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eRequirements\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eUS OBDI ECU (not included).\u003c\/li\u003e\n\u003cli\u003eHondata S300 system (not included, available at SpeedFactory Racing).\u003c\/li\u003e\n\u003cli\u003e4 x coils, distributor block-off and coilplate - Click \u003ca href=\"https:\/\/www.speedfactoryracing.net\/collections\/ems\/products\/speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits\"\u003eHERE!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"title\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eNotes\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eResistor plugs \u003cem\u003e\u003cspan\u003emust\u003c\/span\u003e\u003c\/em\u003e be used.\u003c\/li\u003e\n\u003cli\u003eThe coils require a method of retention. B16A, B18C \u0026amp; F22A engines may use the stock plug cover. Other engines require an alternative method of coil retention (not supplied).\u003c\/li\u003e\n\u003cli\u003eThis is a race product. Cranking times may be increased over a stock ignition set up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts sold through SpeedFactory Racing, whether specified or not, are sold for off-road use only. \u003cspan\u003eBy purchasing any aftermarket performance product from SpeedFactory Racing, the customer takes full responsibility for any use, and\/or misuse of the product and agrees that SpeedFactory Racing holds no responsibility for any consequences, legal, or other, of such use and\/or misuse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll performance modifications and installations are at the customer's own risk. SpeedFactory Racing holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. Items sold for off-road use only are illegal to use on public roads, in most states and provinces, even if your state does not perform testing.  These are intended for racing vehicles which may never be used on a public road.\u003c\/p\u003e","brand":"Hondata","offers":[{"title":"Default Title","offer_id":35089965908122,"sku":"HDA-CPR","price":445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/HONDATA_CPR.jpg?v=1602623430"},{"product_id":"ktunerflash-flash-based-hardware","title":"KTunerFlash - Flash Based Hardware","description":"\u003cp\u003e\u003cstrong\u003eKTunerFlash\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJ234 OBD Interface\u003c\/p\u003e\n\u003cp\u003eOur KTuner flash tuning package comes with a single KTuner hardware unit paired with a single user license for the \u003ca href=\"http:\/\/www.ktuner.com\/ktuner-software\/\"\u003eKTuner software\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis unit is locked to one ECU and allows you to alter the settings in your ECU.\u003c\/li\u003e\n\u003cli\u003eThis allows datalogging and reflashing right over your factory OBD2 port!\u003c\/li\u003e\n\u003cli\u003eKTuner uses direct USB connectivity for fast data transfers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts sold through SpeedFactory Racing, whether specified or not, are sold for off-road use only. \u003cspan\u003eBy purchasing any aftermarket performance product from SpeedFactory Racing, the customer takes full responsibility for any use, and\/or misuse of the product and agrees that SpeedFactory Racing holds no responsibility for any consequences, legal, or other, of such use and\/or misuse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll performance modifications and installations are at the customer's own risk. SpeedFactory Racing holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. Items sold for off-road use only are illegal to use on public roads, in most states and provinces, even if your state does not perform testing.  These are intended for racing vehicles which may never be used on a public road.\u003c\/p\u003e","brand":"K-Tuner","offers":[{"title":"Civic 06-17","offer_id":35090360795290,"sku":"KTUNER-FLASH-Civic","price":449.0,"currency_code":"USD","in_stock":false},{"title":"Accord 08-16","offer_id":35090360860826,"sku":"KTUNER-FLASH-Accord","price":449.0,"currency_code":"USD","in_stock":false},{"title":"TSX 07-14","offer_id":35090360926362,"sku":"KTUNER-FLASH-TSX","price":449.0,"currency_code":"USD","in_stock":false},{"title":"TL 07-14","offer_id":35090360991898,"sku":"KTUNER-FLASH-TL","price":449.0,"currency_code":"USD","in_stock":false},{"title":"S2000 06-09","offer_id":35090361024666,"sku":"KTUNER-FLASH-S2000","price":449.0,"currency_code":"USD","in_stock":false},{"title":"MDX 07-13","offer_id":35090361090202,"sku":"KTUNER-FLASH-MDX","price":449.0,"currency_code":"USD","in_stock":false},{"title":"Ridgeline 09-14","offer_id":35090361155738,"sku":"KTUNER-FLASH-Ridgeline","price":449.0,"currency_code":"USD","in_stock":false},{"title":"Fit 09-13\/15-16","offer_id":35090361188506,"sku":"KTUNER-FLASH-Fit","price":449.0,"currency_code":"USD","in_stock":false},{"title":"CRZ 11-15","offer_id":35090361254042,"sku":"KTUNER-FLASH-CRZ","price":449.0,"currency_code":"USD","in_stock":false},{"title":"Element 07-08","offer_id":35090361319578,"sku":"KTUNER-FLASH-Element","price":449.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/ktunerflash.jpg?v=1594270464"},{"product_id":"speedfactory-racing-obd1-vehicle-to-obd2-distributor-conversion-harness","title":"SpeedFactory Racing OBD1 (Vehicle) to OBD2 (Distributor) Conversion Harness","description":"\u003cp\u003eSpeedFactory Racing \u003cstrong\u003eOBD1 (Vehicle) to OBD2 (Distributor) Conversion Harness\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD-1 vehicle and the other side into your OBD-2 Distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: Harnesses are compatible with \u003cspan style=\"text-decoration: underline;\"\u003e10-pin style OBD-2 Plugs only\u003c\/span\u003e. Please see images.**\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090478825626,"sku":"SF-01-044","price":30.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/jumper_1.jpg?v=1594270910"},{"product_id":"speedfactory-racing-obd2-10-pin-vehicle-plug-to-obd1-distributor-conversion-harness","title":"SpeedFactory Racing OBD2 (Vehicle) to OBD1 (Distributor) Conversion Harness","description":"\u003cp\u003eSpeedFactory Racing \u003cstrong\u003eOBD2 (Vehicle) to OBD1 (Distributor) Conversion Harness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD-2 vehicle and the other side into your OBD-1 Distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: Harnesses are compatible with \u003cspan style=\"text-decoration: underline;\"\u003e10-pin style OBD-2 Plugs only\u003c\/span\u003e. Please see images.**\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090479874202,"sku":"SF-01-045","price":30.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/jumper_2_1.jpg?v=1594270845"},{"product_id":"speedfactory-obd1-to-obd2a-reverse-ecu-conversion-harness","title":"SpeedFactory Racing OBD1 (Vehicle) to OBD2A (ECU) REVERSE Conversion Harness","description":"\u003cp\u003eThe SpeedFactory Racing Honda\/Acura OBD1 (Vehicle) to OBD2A (ECU) REVERSE Conversion Harness allows you to use any OBD2A Honda\/Acura M\/T ECU in an OBD1 vehicle (92-95 Civic, 92-95 Acura Integra, 92-95 Honda Accord (4 Cylinder), 92-95 Honda Prelude, and 92-95 Honda Del Sol). \u003c\/p\u003e\n\u003cp\u003eThis harness is perfect for utilizing JDM Spec OBD2A ECU's that are often included with Japanese engine swaps.\u003c\/p\u003e\n\u003cp\u003eWe designed our harnesses to be superior to other versions available on the market by using original equipment style ECU pin connections on all plugs, lengthening the harness leads to 7\" and by using durable automotive grade wire that exceeds OEM specifications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple and no cutting or soldering is necessary (for JDM Spec OBD2A ECU's). Plug in one side of the harness to your OBD2A ECU and the other side into your factory OBD1 chassis harness.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNote: For USDM Spec ECU applications, installation will require a secondary 4-wire oxygen sensor .\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090560483482,"sku":"SF-01-040","price":104.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/rh-1_s.jpg?v=1594271292"},{"product_id":"t1-b-series-cam-trigger-kit","title":"T1 B-Series Cam Trigger Kit","description":"\u003cp\u003eThe use of this kit allows you to change from the factory Honda mag sensors in the distributor to a more precise digital signal from this sensor. Many aftermarket ECUs read the Hall signal much better than they do the OEM signal from the distributor. Most experience a smoother idle \u0026amp; much smoother power at higher RPM.\u003c\/p\u003e\n\u003cp\u003eThis also allows complete removal of the factory distributor when a multi channel CDI box \u0026amp; individual coils are used with it. If you want to keep a single channel ignition box \u0026amp; the distributor, then this setup can still be used. These signals are on the input side of the ecu, while the ignition system is on the output. Any combination of ignition box\/coils will work.\u003c\/p\u003e\n\u003cp\u003eThe basic kit consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Golden Eagle exhaust cam gear with rare earth magnets installed\u003c\/li\u003e\n\u003cli\u003e1 Dual Pole Hall sensor \u0026amp; mating connector\u003c\/li\u003e\n\u003cli\u003e1 Billet sensor bracket\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eThe complete kit consists of:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 Golden Eagle exhaust cam gear with rare earth magnets installed\u003c\/li\u003e\n\u003cli\u003e1 Golden Eagle intake cam gear\u003c\/li\u003e\n\u003cli\u003e1 Dual Pole Hall sensor \u0026amp; mating connector\u003c\/li\u003e\n\u003cli\u003e1 Billet sensor bracket\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComponents are available separately via our drop-down menu above.\u003c\/p\u003e","brand":"T1 Race Development","offers":[{"title":"Cam Trigger Kit With Exhaust Cam Gear Only","offer_id":35090610192538,"sku":"T1-CTD-EGO","price":505.95,"currency_code":"USD","in_stock":true},{"title":"Cam Trigger Kit (With Both Cam Gears)","offer_id":35090610061466,"sku":"T1-CT-D-BK","price":614.95,"currency_code":"USD","in_stock":true},{"title":"Basic Kit With Both Cam Gears (No Sensor Bracket)","offer_id":35090610290842,"sku":"IG T1-ENG-B-CG + T1-ENG-B-CG\/M + T1-HALL","price":514.95,"currency_code":"USD","in_stock":true},{"title":"Basic Kit With Exhaust Gear Only (No Sensor Bracket)","offer_id":35090610225306,"sku":"IG T1-ENG-B-CG\/M + T1-HALL","price":410.0,"currency_code":"USD","in_stock":true},{"title":"T1 Hall Sensor Mounting Bracket Only","offer_id":35090610094234,"sku":"T1-CT-BRKT","price":100.0,"currency_code":"USD","in_stock":true},{"title":"T1 Dual Pole Hall Sensor Only","offer_id":35090610127002,"sku":"T1-HALL","price":165.0,"currency_code":"USD","in_stock":true},{"title":"T1 B-Series Exhaust Gear With Magnets Only","offer_id":35090610159770,"sku":"T1-ENG-B-CG\/M","price":249.99,"currency_code":"USD","in_stock":true},{"title":"T1 B-Series Matching Intake Gear Only","offer_id":35090610258074,"sku":"T1-ENG-B-CG","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/T1CamTriggerFullKitredlogo.jpg?v=1602784210"},{"product_id":"speedfactory-racing-16v-battery-box","title":"SpeedFactory Racing 16V Battery Box - Driver Or Passenger Mount","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eMake things easy on yourself\u003c\/strong\u003e and avoid the frustration of fabricating a mounting solution for your valuable 16V battery - \u003cstrong\u003ewe’ve done the work for you!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe SpeedFactory Racing 16V Battery Box is designed for \u003cstrong\u003e\u003cem\u003epassenger or driver's side\u003c\/em\u003e\u003c\/strong\u003e framerail mounting and for use with XS Power 16V AGM lead acid batteries - models XP1000, D1600, and S1600. There are very slight differences in the case sizing between these models but all of them will fit our battery box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e-\u003c\/strong\u003e Constructed from laser cut \u0026amp; CNC-formed A36 hot-rolled mild steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Battery box seams are TIG welded where necesssary for added rigidity\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Laser-cut \"SF\" logos on battery box and battery hold-down strap\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e- \u003c\/strong\u003eTemporary mounting hole utilizes an existing threaded location in the framerail (most Honda\/Acura applications) and pre-cut X-patterned cutouts facilitate ease of mounting and welding during installation\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Designed for batteries spec'd at 10.24” L x 7.20” H x 6.75” W (Other brand batteries that match this sizing should fit as well)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e-\u003c\/strong\u003e Detailed Installation instructions are included. Minor welding is required for secure installation.\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090632966298,"sku":"SF-02-096","price":159.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/battery_box_6_s.jpg?v=1762291986"},{"product_id":"dragy-gps-based-performance-meter","title":"Dragy GPS Based Performance Meter","description":"\u003cp\u003e\u003cstrong\u003eMonitor your 0-60mph, 60-130mph, 100-200kmh, 1\/4 mile, 1\/2 mile performance, and more! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDragy uses high speed GPS satellites to accurately measure your vehicles performance within 1\/100th of a second. The Dragy software automatically charts slope on all timeslips which you can then post to forums or social media, share with friends, or even upload to the Dragy leader board. The Dragy box is extremely compact at 1\" x 3\" (25.4mm x 76.2mm) and can be set on the dash when testing and stored in the glove box or center console when not in use.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRuns are saved in both metric and SAE formats, allowing comparisons of 100-200kmh and all metric equivalents. You can also define your own performance windows for measuring both trap speeds and\/or elapsed times, time to brake performance such as 100-0, and much more.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe system can be run simultaneously with JB4 Mobile and other bluetooth apps. Requires the Dragy app which is available free of charge for both iOS and Android.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eMeasure acceleration (0-100kmh, 100-200kmh, 1\/4 mile and more) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMeasuring braking time (100-0kmh, 200-0kmh and much more) \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG-force measurement \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHighscore list sorted by manufacturer \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDragy \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVideo Drag and Drop \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eProfile (garage, profile picture and much more)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBox contents:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eDragy Performance Box Lap and Accelerometer \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUSB charging cable \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x metal plates and 3M adhesive strip \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eManual \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/t\/5\/assets\/description_image_dragy2.jpeg?v=1594272223\" alt=\"2\" width=\"800\" height=\"800\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/t\/5\/assets\/description_image_dragy3.jpeg?v=1594272224\" alt=\"3\" width=\"800\" height=\"800\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/t\/5\/assets\/description_image_dragy4.png?v=1594272226\" alt=\"4\" width=\"800\" height=\"800\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/t\/5\/assets\/description_image_dragy5.png?v=1594272227\" alt=\"5\" width=\"800\" height=\"800\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/smhttp-ssl-51231.nexcesscdn.net\/media\/catalog\/product\/cache\/3\/image\/800x800\/9df78eab33525d08d6e5fb8d27136e95\/d\/r\/dragy6.jpeg\" alt=\"6\" width=\"800\" height=\"800\"\u003e\u003c\/p\u003e","brand":"Dragy","offers":[{"title":"Default Title","offer_id":35090717245594,"sku":"Dragy","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/dragy6.jpg?v=1594272289"},{"product_id":"speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits","title":"SpeedFactory Racing B-Series VTEC Coil On Plug Adapter Plate and Coil on Plug Combo Kits","description":"\u003cp\u003eCommonly known performance issues with OEM Honda\/Acura distributor igniters at higher power levels cause many people to convert to more reliable COP (coil on plug) style ignition systems, and the SpeedFactory Racing B-Series VTEC Coil On Plug Adapter Plate is necessary for those making the switch. Our black anodized, CNC-machined billet aluminum plate will perfectly fit atop your B-Series VTEC valve cover to adapt OEM fitment K-Series ignition coils to your engine.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo Kit Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe SpeedFactory Billet Distributor Cap Delete\u003c\/strong\u003e was developed for COP-converted Honda\/Acura engine setups utilizing the factory internal distributor sensors.\u003c\/p\u003e\n\u003cp\u003eOur cap delete fits the following applications:\u003c\/p\u003e\n\u003cp\u003e1992-2000 Honda Civic (all D15\/D16 engines)\u003c\/p\u003e\n\u003cp\u003e1999-2000 Honda Civic Si (B16A2 engine)\u003c\/p\u003e\n\u003cp\u003e1994-1997 Honda Delsol Si VTEC (B16A3 engine)\u003c\/p\u003e\n\u003cp\u003e1992-1996 Honda Prelude Si (H22 \/ H23 engines)\u003c\/p\u003e\n\u003cp\u003e1993-2001 Honda Prelude VTEC (all models)\u003c\/p\u003e\n\u003cp\u003e1990-2001 Acura Integra LS\/RS\/GS\/GS-R (all B18A\/B\/C engines)\u003c\/p\u003e\n\u003cp\u003eThis cap delete is CNC machined from billet aluminum, and comes in a high quality black anodized finish. This is designed to fit perfectly on OEM distributors only, aftermarket distributors can have slightly different fitment. Please click \u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/engine-and-billet-parts\/billet-parts\/speedfactory-billet-distributor-cap-delete\"\u003eHERE\u003c\/a\u003e if you are not sure which cap is right for your distributor's part number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHondata Coil Pack Retrofit System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hondata Coil Pack Retrofit (CPR) allows the use of 'coil on plug' individual ignition coils on engines with distributor based ignition systems (D, B, F and H series Honda engines). It does this by replacing the stock coil and ignition with an electronic circuit which can drive igniter type individual ignition coils, such as used on later model Honda engines. A Hondata S300 system and US OBDI ECU are required. Click \u003ca href=\"https:\/\/www.speedfactoryracing.net\/electronics\/ems\/hondata-coil-pack-retrofit-cpr\"\u003eHERE\u003c\/a\u003e for more information.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about a COP conversion, please contact our knowledgeable sales team at (253) 566-4331 or email us at sales@speedfactoryracing.net\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eParts sold through SpeedFactory Racing, whether specified or not, are sold for off-road use only. \u003cspan\u003eBy purchasing any aftermarket performance product from SpeedFactory Racing, the customer takes full responsibility for any use, and\/or misuse of the product and agrees that SpeedFactory Racing holds no responsibility for any consequences, legal, or other, of such use and\/or misuse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll performance modifications and installations are at the customer's own risk. SpeedFactory Racing holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. These products are intended for racing vehicles which may never be used on a public road.\u003c\/p\u003e\n\u003cscript src=\"moz-extension:\/\/f039f541-99a7-45c7-ae34-01a1918c3684\/js\/app.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"SpeedFactory Racing","offers":[{"title":"NONE \/ NO COILS \/ NO CPR","offer_id":36573566238874,"sku":"SF-02-002","price":85.92,"currency_code":"USD","in_stock":true},{"title":"NONE \/ NO COILS \/ Add CPR","offer_id":36573566271642,"sku":"IG SF-02-002 + HDA-CPR","price":473.43,"currency_code":"USD","in_stock":true},{"title":"NONE \/ OEM DENSO COILS (RECOMMENDED) \/ NO CPR","offer_id":42018553069722,"sku":"IG SF-02-002 + 4 x Denso 673-2301","price":319.12,"currency_code":"USD","in_stock":true},{"title":"NONE \/ OEM DENSO COILS (RECOMMENDED) \/ Add CPR","offer_id":42018553102490,"sku":"IG SF-02-002 + IG Denso 673-2301 + HDA-CPR","price":706.63,"currency_code":"USD","in_stock":true},{"title":"B16 B18A\/B D15\/D16 \/ NO COILS \/ NO CPR","offer_id":36573566369946,"sku":"IG SF-02-002 + SF-02-082","price":164.54,"currency_code":"USD","in_stock":true},{"title":"B16 B18A\/B D15\/D16 \/ NO COILS \/ Add CPR","offer_id":36573566402714,"sku":"IG SF-02-002 + SF-02-082 + HDA-CPR","price":556.14,"currency_code":"USD","in_stock":true},{"title":"B16 B18A\/B D15\/D16 \/ OEM DENSO COILS (RECOMMENDED) \/ NO CPR","offer_id":42018553135258,"sku":"IG SF-02-002 + SF-02-082 + Denso 673-2301","price":397.72,"currency_code":"USD","in_stock":true},{"title":"B16 B18A\/B D15\/D16 \/ OEM DENSO COILS (RECOMMENDED) \/ Add CPR","offer_id":42018553168026,"sku":"IG SF-02-002 + SF-02-082 + IG Denso 673-2301 + HDA-CPR","price":789.32,"currency_code":"USD","in_stock":true},{"title":"B18C\/C1\/C5 \/ NO COILS \/ NO CPR","offer_id":36573566501018,"sku":"IG SF-02-002 + SF-02-083","price":164.54,"currency_code":"USD","in_stock":true},{"title":"B18C\/C1\/C5 \/ NO COILS \/ Add CPR","offer_id":36573566533786,"sku":"IG SF-02-002 + SF-02-083 + HDA-CPR","price":556.14,"currency_code":"USD","in_stock":true},{"title":"B18C\/C1\/C5 \/ OEM DENSO COILS (RECOMMENDED) \/ NO CPR","offer_id":42018553200794,"sku":"IG SF-02-002 + SF-02-083 + IG Denso 673-2301","price":397.72,"currency_code":"USD","in_stock":true},{"title":"B18C\/C1\/C5 \/ OEM DENSO COILS (RECOMMENDED) \/ Add CPR","offer_id":42018553233562,"sku":"IG SF-02-002 + SF-02-083 + Denso 673-2301 + HDA-CPR","price":789.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/4_d353825f-6ea8-419a-a45c-5f4fcd00b6bc.jpg?v=1666716845"},{"product_id":"speedfactory-racing-obd0-vehicle-to-obd1-distributor-conversion-harness","title":"SpeedFactory Racing OBD0 MPFI (Vehicle) to OBD1 (Distributor) Conversion Harness","description":"\u003cp\u003eSpeedFactory Racing \u003cstrong\u003eOBD0 MPFI (Vehicle) to OBD1 (Distributor) Conversion Harness\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSpeedFactory Racing Distributor Conversion Harnesses were developed to save you time and also to help eliminate the many common problems associated with distributor re-wiring.\u003c\/p\u003e\n\u003cp\u003ePerfect for engine swaps or mis-matched distributor-to-engine harness situations, we designed our harnesses to be superior to other versions available on the market by using original equipment style pin connections on all plugs, keeping the leads to a safe yet functional length, and by using durable automotive grade wire that meets \/ exceeds OEM specifications.\u003cbr\u003e\u003cbr\u003eInstallation is simple and no cutting or soldering is necessary. Plug in one side of the harness to your OBD0 1988-91 MPFI vehicle and the other side into your OBD-1 Distributor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed an OBD0 MPFI to OBD-1 ECU Conversion Harness also? Click\u003ca href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/conversion-harnesses\/speedfactory-obd0-to-obd1-ecu-conversion-harness-multipoint-injection\"\u003e HERE!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090802966682,"sku":"SF-01-046","price":30.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/obd0_to_obd1.jpg?v=1594272812"},{"product_id":"k-tuned-electric-water-pump","title":"K-Tuned Electric Water Pump","description":"\u003cp\u003e\u003cstrong\u003eK-Tuned Electric Water Pump - K-Tuned Water Plate, may fit other applications.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Pump uses -12 ORB fitting on both the Inlet and outlet of the pump. Please do not try and us a  Full Length -12AN Fitting inside the pump as it will interfer with the pumps internals and could destroy your pump. \u003c\/p\u003e\u003cdiv\u003e*Note, water pump provides 20 gallons per minute flow rating\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":35090803916954,"sku":"KTD-KTD-WTR-PM2","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/kw-tb-405_13.jpg?v=1594272824"},{"product_id":"speedfactory-racing-tps-throttle-position-sensor-b-d-h-f-series-engines","title":"SpeedFactory Racing (TPS) Throttle Position Sensor - B\/D\/H\/F Series Engines","description":"\u003cp\u003eThis is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-Year Warranty from original date of purchase.\u003c\/p\u003e\u003cp\u003eEngine Compatibility: Honda\/Acura B-Series, D-Series, H-Series, and F-Series (Accord Only)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e**IMPORTANT NOTE:\u003c\/strong\u003e Please make sure to use the provided gasket to seal out moisture from harming the sensor's internal circuitry.**\u003c\/p\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Default Title","offer_id":35090859983002,"sku":"SF-01-101","price":52.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/tps_sensor_final_s.jpg?v=1594273151"},{"product_id":"xs-power-xp1000-16v-battery-and-1004-16v-15a-intellicharger-combo","title":"XS Power XP1000 16V Battery and 1004 16V, 15A IntelliCharger Combo","description":"\u003cp style=\"margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"margin: 0in 0in 12.0pt 0in;\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eXP1000 16V Battery and 1004 16V, 15A IntelliCharger Combo\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"margin: 0in 0in 12.0pt 0in;\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003eFor many serious drag racers, 12 volts just isn't enough. XS Power 16V batteries enhance the operation and efficiency of critical race components including cooling fans, electric water pumps, fuel pumps, etc. The additional power from these batteries also creates a hotter ignition spark which allows you to increase your spark plug gap and increase fueling - which when combined will drastically increase performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003eXS Power AGM batteries can also save you weight and put the power where it is needed. These top shelf batteries are loaded with features but are still 1\" shorter than other 16 volt batteries which makes them easy to install in tight places. XS Power 16 Volt Batteries provides a maximum of 2400 amps, making them perfect for racing vehicles. Performance batteries are designed to store energy so you don't need a capacitor and they are also resistant to extreme vibrations. XS Power batteries provide 16-volt deep cycle power and feature a sealed absorbed glass mat, also known as AGM. These batteries are designed to be non-hazardous with no external vent and include terminal hardware for an easy installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\"\u003e\u003cstrong\u003eWeight Lbs.\u003c\/strong\u003e – 46.5\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight Kgs\u003c\/strong\u003e. - 21.1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength\u003c\/strong\u003e – 10.24 in\u003cbr\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e – 7.20 in\u003cbr\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e – 6.75 in\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMAX Amps\u003c\/strong\u003e – 2400\u003cbr\u003e\u003cstrong\u003eCA\u003c\/strong\u003e – 675\u003c\/p\u003e\n\u003cp style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003eSpeedFactory Racing 16V Battery Box (Optional)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003eMake things easy on yourself and avoid the frustration of fabricating a mounting solution for your valuable 16V battery - we’ve done the work for you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\" data-mce-fragment=\"1\" data-mce-style=\"font-variant-ligatures: normal; font-variant-caps: normal; orphans: 2; text-align: start; widows: 2; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; word-spacing: 0px; margin: 0in 0in 12.0pt 0in;\"\u003e\u003cspan style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 10.5pt; font-family: 'Segoe UI',sans-serif; color: #212b36;\"\u003eThe SpeedFactory Racing 16V Battery Box is designed for RH side framerail mounting and for use with XS Power 16V AGM lead acid batteries - models XP1000, D1600, and S1600. There are very slight differences in the case sizing between these models but all of them will fit our battery box. Add one to this order for only $139.99 - Save $10 with this combo deal!\u003c\/span\u003e\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"WITHOUT SpeedFactory 16V Battery Box","offer_id":36894920867994,"sku":"XSP 1000CK2","price":649.99,"currency_code":"USD","in_stock":true},{"title":"With SpeedFactory 16V Battery Box","offer_id":36894920900762,"sku":"IG XSP 1000CK2 + SF-02-096","price":813.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/XP1000-CK2Logo.jpg?v=1603910654"},{"product_id":"gp1-racing-strain-shift-knobs","title":"GP1 Racing Strain Shift Knobs","description":"\u003cp data-mce-fragment=\"1\"\u003eGP1 Racing Strain Knobs feature state of the art technology and have been used for many years in several well-known drag cars. Simply install this shift knob then wire in the power\/ground\/signal wires to the ECU, and set up the input in your EMS system to trigger an ignition cut for easy, seamless full-throttle clutchless upshifting!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis system works great for either rod or cable-actuated shifters such as your common Honda\/Acura B-Series or K-Series cars. We use the 2.5V Reference Amplifier Module option as most standalone EMS will easily accept a 0-5V trigger range. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2.5v Resting Voltage for Motec, AEM, Haltech, Fuel Tech, etc.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e±0.5% Accuracy\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5V or 8-16V Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOptions:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThread Pitch (m10x1.50 OEM Honda Thread Pitch)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThread Pitch (7\/16×20 G-Force Thread Pitch)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: When using 5v output resting voltage will read under 2V.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSetup Instructions: AEM V2, AEM Infinity, Motec M1, Fueltech, and More.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"CLICK HERE FOR FULL STRAIN KNOB SETUP INSTRUCTIONS\" href=\"https:\/\/www.dropbox.com\/s\/t4bo5iisenrztot\/GP1-Strain-Setup-and-Setting-Document-Rev-d.pdf?dl=0\"\u003eCLICK HERE FOR FULL SETUP INSTRUCTIONS!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003ePlease call or email our knowledgeable staff if you have any questions before placing your order. Support@speedfactoryracing.net or (253)566-4331.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eKeywords: Flatshifter, Strain Gauge, Clutchless Shifting, Strain\u003c\/span\u003e\u003c\/p\u003e","brand":"GP1 Racing","offers":[{"title":"OEM Honda (M10 x 1.50)","offer_id":41081460916378,"sku":"GP1-HONDA-STRAIN","price":832.5,"currency_code":"USD","in_stock":true},{"title":"G-Force (7\/16 x 20)","offer_id":41081460949146,"sku":"GP1-HONDA-STRAIN-GFORCE","price":832.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/GP1Strain2.jpg?v=1633985828"},{"product_id":"hondata-ctr-maf-500","title":"Hondata CTR MAF 500","description":"\u003cdiv class=\"tab-pane active\" id=\"tab-description\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eThis sensor replaces your FK2\/FK8 MAF sensor to increase the MAF air metering range from 300 g\/s to 500 g\/s. With a stock MAF you will reach the maximum range with a stock turbo, airbox and bolt-ons. When this happens the fueling becomes inaccurate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eThe Hondata CTR MAF 500 accurately measures 60% more air with the stock airbox, which allows you to tune up to around 640 hp. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eInstallation involves unplugging the stock sensor and re-using the same two phillips screws to install the new sensor. A FlashPro modification file is provided with this sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: arial, helvetica, sans-serif; font-size: 14px;\"\u003eA must-have bolt on for the Civic Type R. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Hondata","offers":[{"title":"Default Title","offer_id":41673799598234,"sku":"HDA-CTR-MAF-500","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/hondata-ctr-maf-500-sml-500x500.jpg?v=1645566465"},{"product_id":"xs-power-d1600","title":"XS Power D1600","description":"\u003cp data-mce-fragment=\"1\"\u003eXS Power 16V AGM Battery, Max Amps 2,400A CA: 775A\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eWeight Lbs.\u003c\/strong\u003e – 46.68\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Weight Kgs.\u003c\/strong\u003e – 21.17\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLength\u003c\/strong\u003e – 10.24 in\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Height\u003c\/strong\u003e – 7.20 in\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Width\u003c\/strong\u003e – 6.46 in\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMAX Amps\u003c\/strong\u003e – 2400\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e CA – \u003c\/strong\u003e775A\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e RC \u003c\/strong\u003e– 96 min\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Ah \u003c\/strong\u003e– 56\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e587 Stud Adapter Hardware Included\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"http:\/\/www.4xspower.com\/XSpower-1YR-Warranty.pdf\" title=\"1 Year Warranty\" target=\"_blank\" data-mce-href=\"http:\/\/www.4xspower.com\/XSpower-1YR-Warranty.pdf\"\u003e1 Year Warranty\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":41988455530650,"sku":"XSP D1600","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/D1600-turn-1.jpg?v=1652898276"},{"product_id":"denso-honda-acura-k-series-premium-direct-ignition-coil-packs","title":"Denso Honda\/Acura K-Series Premium Ignition Coil Packs, Set of 4","description":"\u003cp\u003e\u003cstrong\u003eSet of 4\u003c\/strong\u003e brand new genuine Denso Honda\/Acura K-series direct ignition coil packs!\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDenso's proven ignition coils maximize performance and efficiency through consistent high-energy output.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese premium coils are compatible with B-series engines using our Coil-On-Plug conversion kits, found\u003c\/strong\u003e \u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/engine-and-billet-parts\/billet-parts\/speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits-15304\" style=\"color: #ff2a00;\" data-mce-href=\"https:\/\/www.speedfactoryracing.net\/speedfactory-parts\/engine-and-billet-parts\/billet-parts\/speedfactory-b-series-vtec-coil-on-plug-adapter-plate-and-coil-on-plug-combo-kits-15304\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible K-series vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 Civic Si\u003c\/li\u003e\n\u003cli\u003e2006-2011 Civic Si\u003c\/li\u003e\n\u003cli\u003e2002-2006 RSX (all models)\u003c\/li\u003e\n\u003cli\u003e2004-2008 TSX\u003c\/li\u003e\n\u003cli\u003e2003+ Accord (4 cyl)\u003c\/li\u003e\n\u003cli\u003e2002-present CRV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":42018479210650,"sku":"IG DENSO 673-2301","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/DensoCoilsLogo.jpg?v=1653596189"},{"product_id":"hybrid-racing-battery-relocation-bracket-06-11-civic-si","title":"Hybrid Racing Battery Relocation Bracket (06-11 Civic Si)","description":"\u003cul\u003e\n\u003cli\u003eFits 2006-2011 Civic Si\u003c\/li\u003e\n\u003cli\u003ePowder coated, laser-cut \u0026amp; welded steel\u003c\/li\u003e\n\u003cli\u003eFits OEM size or smaller batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eMake room for larger intakes or to clean up your engine bay by installing the Hybrid Racing battery relocation tray in front of the gearbox. This bracket also works with and is part of  the Hybrid Racing 3.5 inch cold air intake kit. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2011 Civic Si (FA5\/FG2)\u003c\/li\u003e\n\u003cli\u003e2007-2010 Civic Type R FD2 (requires modification)\u003c\/li\u003e\n\u003cli\u003e2007-2010 Civic Type R FN2 (requires modification)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039499325594,"sku":"HYB-BRK-01-05","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/b5c205a0c6c5f63b2ff1a85a57e203cc_2000x_33f8eeb9-6813-4ee9-9497-b63452bb305e.jpg?v=1654040899"},{"product_id":"hybrid-racing-conversion-race-harness-for-k-series-engines-hyb-cwh-01-99","title":"Hybrid Racing Universal K-Series Swap Conversion Wiring Harness","description":"\u003cul\u003e\n\u003cli\u003eUniversal K-Swap conversion harness!\u003c\/li\u003e\n\u003cli\u003eBrand new connectors and pins sourced from the same company Honda uses.\u003c\/li\u003e\n\u003cli\u003eFree phone and email tech support.\u003c\/li\u003e\n\u003cli\u003ePowering 1000's of K-Swaps world wide!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cb\u003eWho should purchase the Universal Harness? \u003c\/b\u003e\n\u003cp\u003eThe Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is designed for those people who have decided to install a K-Series engine into a non-honda chassis or a chassis where a standard plug and play conversion harness is not available. (such as Preludes, DA Integras, Accords, and older Honda chassis)\u003c\/p\u003e\n\u003cp\u003eThis harness has also been used in custom open wheel cars such as the Ariel Atom, RCR Superlite Roadster, Sandrails, and 3 wheeled Trikes. It has also been used on Mini Coopers, Toyota MR-2s, Lotus Elises as well as full blown tubed frame race cars.\u003c\/p\u003e\n\u003cp\u003eIf your engine of choice is the K-Series motor and plan to use the OEM K-Series ECU than we can help you get it started.\u003c\/p\u003e\n\u003cb\u003eWhat is included with the race harness? \u003c\/b\u003e\n\u003cp\u003eThe race harness includes a fuel pump relay, a main relay and a primary oxygen sensor relay. The harness comes wired with the provisions for the OEM K-Series 02-04 Wideband o2 sensor and an OBD2 port. This harness has outputs including, tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control and for the starter relay. You will need to supply the harness with a constant 12v and switch 12v source.\u003c\/p\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug and play K-Swap.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with? \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM \/ JDM 02-04 wiring harnesses including, K20A, K20A2, K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any 05-06 OR K24 engine wiring harnesses and ECU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eWhat type of connectors and pins do you use? \u003c\/b\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness we utilize brand new connectors, terminals and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine made and human checked so they are issue free.\u003c\/p\u003e\n\u003cb\u003eWhat if I have questions or problems? \u003c\/b\u003e\n\u003cp\u003eTo ensure a trouble-free install all of the wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associate with your swap. If you have any problems at all with the swap just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eWhatever you can imagine!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/HYB_CWH_01_99_-_INSTALL_GUIDE.pdf?v=1586542423\" target=\"_blank\"\u003eView Install Guide HERE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039509254298,"sku":"HYB-CWH-01-99","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/IMG_4572.jpg?v=1654041112"},{"product_id":"hybrid-racing-liquid-filled-fuel-pressure-gauge","title":"Hybrid Racing Liquid Filled Fuel Pressure Gauge V2 (Universal)","description":"\n0-100 PSI range\nSatin black steel case\nGray face with HR green needle\n1\/8th NPT threaded port\nLiquid filled for consistent needle movement\n\n \n\nDescription\nVehicle Fitment\nWhat's Inside\n  Install Guide --\u0026gt;\n\n\n\n\nOur precision-engineered Hybrid Racing fuel pressure gauge has a new look and improvements. It provides accurate fuel pressure readings that are critical for EFI fuel systems. They resist the most severe vibrations, offer a 0-100 psi reading, and are housed in an all-steel case with a satin black finish, a new Gray face, and a Hybrid Racing Green needle. This is a universal part that works great with any aftermarket fuel system. Keep tabs on your fuel pressure in a stylish \u0026amp; reliable way. High-quality construction, made in the USA. \n\n\nFits:\n\nUniversal\n1\/8th NPT threaded \n\n\nTab 3 content\nView Install Guide HERE\n","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039511416986,"sku":"HYB-FPG-00-03","price":47.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/HYB-FPG-01-03-001-SQ.jpg?v=1670976792"},{"product_id":"hybrid-racing-k-swap-coolant-temp-sensor-adapter","title":"Hybrid Racing K-Series Swap Coolant Temp Sensor Adapter","description":"\u003cul\u003e\n\u003cli\u003eEasily adapt your coolant temp sensor for your K-Swap\u003c\/li\u003e\n\u003cli\u003eEasy installation and perfect fit.\u003c\/li\u003e\n\u003cli\u003eOuter Thread 3\/8 BSPT\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits K20 \u0026amp; K24 intake manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n\u003c!-- \u003cli\u003e\u003ca href=\"#tab3\"\u003eWhat's Inside\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"#tab4\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e --\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eThis useful fitting allows you to insert a factory B\/D coolant temp sensor into the upper section of the K-Series coolant system. This is required since the older generation gauge clusters can't understand the information being send from the K-Series ECU. Thread the adapter in, screw the coolant sensor in and you'll have a working temp gauge!\u003c\/p\u003e\n\u003cp\u003eThis adapter replaces the OEM idle air assist valve (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into. If you don't want to run a hose insert, this is the piece for you. You're probably thinking, but wait can't I just get any old fitting? NOPE, this port uses a weird thread size so we did all the leg work, designed a new fitting and present it to you here in all of its glory.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eAll K-Series intake manifolds using the Idle air assist valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003eTab 3 content\u003c\/li\u003e\n\u003cli id=\"tab4\"\u003e\u003ca href=\"#\" target=\"_blank\"\u003eView Install Guide HERE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039512236186,"sku":"HYB-CTA-01-05","price":23.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/e7c2d95b8293d32e0db931fb49f00596.jpg?v=1654041159"},{"product_id":"hybrid-racing-k-swap-ground-kit","title":"Hybrid Racing K-Series Swap Ground Kit","description":"\u003cul\u003e\n\u003cli\u003eShielded, heavy-gauge wire\u003c\/li\u003e\n\u003cli\u003eThree engine\/transmission to chassis grounds.\u003c\/li\u003e\n\u003cli\u003eHeavy duty battery ground strap included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n\u003c!-- \u003cli\u003e\u003ca href=\"#tab3\"\u003eWhat's Inside\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"#tab4\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e --\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eOften when doing a K-Swap, the original grounds don't reach or require cutting and splicing to get everything connected. Hybrid Racing's K Swap Ground Kit is a cost-effective way to be sure that you will not run into any problems that may be caused by improperly grounded components and make a quick and easy solution to getting your K-Swap grounded.\u003c\/p\u003e\n\u003cp\u003eGood ground connections are arguably the most important part of any electrical system. Without them, there's no way for current to flow through an electrical system. Being confident that your electrical system is properly grounded is critical when it's time to troubleshoot problems with any fuel injected car. Obviously, this is even more important in the case of an engine swapped vehicle, where any number of electrical issues could arise.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e92-00 Honda Civic with K-Swap\u003c\/li\u003e\n\u003cli\u003e94-01 Acura Integra with K-Swap\u003c\/li\u003e\n\u003cli\u003eThey can be used on other K Swapped vehicles, but you may have to find different places on the chassis to connect the cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003eTab 3 content\u003c\/li\u003e\n\u003cli id=\"tab4\"\u003e\u003ca href=\"#\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView Install Guide HERE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039513776282,"sku":"HYB-GRD-01-05","price":52.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/IMG_4497.jpg?v=1654041196"},{"product_id":"oem-honda-coolant-switch","title":"Hybrid Racing Honda Replacement Coolant Switch","description":"\u003cul\u003e\n\u003cli\u003eUsed to control radiator fan.\u003c\/li\u003e\n\u003cli\u003eOEM B\/D\/K-series replacement sensor\u003c\/li\u003e\n\u003cli\u003eCommon K-Series engine swap product. \u003c\/li\u003e\n\u003cli\u003eUniversal fit with Hybrid Racing radiator hose insert and radiators\u003c\/li\u003e\n\u003cli\u003eM18x1.5 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eThis sensor is designed to switch the radiator fan on when the coolant gets above safe operating temperature. Easily inserted into any Hybrid Racing K Swap Radiators and is a must-have for anyone doing a K-Swap. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039514071194,"sku":"HYB-CSW-01-02","price":42.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/IMG_4404.jpg?v=1654041204"},{"product_id":"oem-honda-thermo-unit","title":"Hybrid Racing Honda Replacement Coolant Temperature Sensor","description":"\u003cul\u003e\n\u003cli\u003eSends coolant temp to gauge cluster\u003c\/li\u003e\n\u003cli\u003eThreads into Hybrid Racing Temp Sensor Adapter\u003c\/li\u003e\n\u003cli\u003eThreads into any Hybrid Racing K Swap Radiator\u003c\/li\u003e\n\u003cli\u003e1\/8th NPT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eThis sensor is a must have for any k-swap. It reads the coolant's temperature and sends a signal to the gauge cluster in the EF\/EG\/EK\/DC chassis. It easily threads into the Hybrid Racing Temp Sensor Adapter or any Hybrid Racing K Swap Radiator and is a must have for anyone doing a K-Swap in an older Honda chassis. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039514235034,"sku":"HYB-THS-01-02","price":23.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/IMG_4420.jpg?v=1654041208"},{"product_id":"hybrid-racing-k-series-conversion-harness-for-88-91-civic-crx","title":"Hybrid Racing K-Series Swap Conversion Wiring Harness (88-91 Civic\/CRX)","description":"\u003cul\u003e\n\u003cli\u003ePlug and play K-Swap conversion harness!\u003c\/li\u003e\n\u003cli\u003eBrand new OEM connectors and pins \u003c\/li\u003e\n\u003cli\u003eFree phone and email tech support.\u003c\/li\u003e\n\u003cli\u003ePowering 1000's of K-Swaps world wide!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003eWith over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!\u003c\/p\u003e\n\u003cp\u003eThe K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug-and-play K-Swap.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat engine harness does the Hybrid Racing conversion harness work with? \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis harness works with all USDM \/ JDM 02-04 wiring harnesses, including, K20A, K20A2, and K20A3.\u003c\/li\u003e\n\u003cli\u003eThis harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A\/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.\u003c\/li\u003e\n\u003cli\u003eThis harness does NOT work with any 05-06 OR K24 engine wiring harnesses and ECU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eWhat type of connectors and pins do you use? \u003c\/b\u003e\n\u003cp\u003eWhen we construct a Hybrid Racing harness, we utilize brand new connectors, terminals, and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine-made and human checked, so they are issue-free.\u003c\/p\u003e\n\u003cb\u003eWhat if I have questions or problems? \u003c\/b\u003e\n\u003cp\u003eTo ensure a trouble-free install, all wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associated with your swap. If you have any problems at all with the swap, just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 CRX \u0026amp; Civic with K-Swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2218\/5701\/files\/HYB_CWH_01_07_-_INSTALL_GUIDE.pdf?v=1586543611\" target=\"_blank\"\u003eView Install Guide HERE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039515283610,"sku":"HYB-CWH-01-07","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/IMG_4510.jpg?v=1654041237"},{"product_id":"hybrid-racing-2002-2004-k-series-honda-ecu-immobilizer-delete-chip","title":"Hybrid Racing K-Series Honda ECU Immobilizer Bypass","description":"\u003cul\u003e\n\t\u003cli\u003eBypass the immobilizer and the multiplex when doing a K-Swap\u003c\/li\u003e\n\t\u003cli\u003eWorks with the following ECU's PLM, PLR, PND, PNF, PRA, PRB, and PPA.\u003c\/li\u003e\n\t\u003cli\u003eUse a stock ECU with your K-Swap! No costly K-Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- split --\u003e \n\n\u003c!--Start tab labels--\u003e\n\u003cul class=\"tabs\"\u003e\n  \u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"#tab2\"\u003eVehicle Fitment\u003c\/a\u003e\u003c\/li\u003e\n  \u003c!-- \u003cli\u003e\u003ca href=\"#tab3\"\u003eWhat's Inside\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"#tab4\"\u003eInstall Guide\u003c\/a\u003e\u003c\/li\u003e --\u003e\n\u003c\/ul\u003e\n\u003c!--Start tab content--\u003e\n\u003cul class=\"tabs-content\"\u003e\n  \u003cli class=\"active\" id=\"tab1\"\u003e\u003cp\u003eIn the past when doing a K-Swap you either had to purchase a Type R ECU or a Hondata Kpro. Now with the release of the new Immobilizer Removal Unit, you can use your bone STOCK 02-04 ECU. Simply connect the 4 wires as outlined in the install guide and you are ready to rock. In addition to bypassing the Immobilizer, it also disables the multiplex code P0600 so that you can run an error free ecu.\nThe unit works with the following ECU's so make sure to double check the code on the side of your ECU before purchasing:\nPLM, PLR, PND, PNF, PRA, PRB, and PPA.\u003c\/p\u003e\u003c\/li\u003e\n  \u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\t\u003cli\u003eWorks with the following ECU's PLM, PLR, PND, PNF, PRA, PRB, and PPA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n  \u003cli id=\"tab3\"\u003eTab 3 content\u003c\/li\u003e\n  \u003cli id=\"tab4\"\u003e\u003ca href=\"#\" target=\"_blank\"\u003eView Install Guide HERE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":42039519281306,"sku":"HYB-IMR-01-05","price":237.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/products\/d4c2e4d548460a819b24a74bc046fb4c.jpg?v=1654041390"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0401\/5308\/8154\/collections\/5295b71d5d906b49cd32039545c68766.jpg?v=1594260263","url":"https:\/\/www.speedfactoryracing.net\/collections\/electronics.oembed?page=5","provider":"SpeedFactoryRacing","version":"1.0","type":"link"}