SpeedFactory | Tuning & Race Fabrication

Kevin S/C Civic HB

Current best performances:
9.20 @ 170.86 mph
9.24 @ 173.48mph

Here are the current build specs, which may change slightly as we progress.

We are planning on making the switch to liquid-to-air intercooler and 26″ slicks this year.

I’ll keep this updated as changes take place.

Engine:
Golden Eagle sleeved B18C 84mm
Arias Pistons 10.8:1 w/upgraded wrist pins
BME Forged Aluminum Rods
ACL bearings, Calico coated rod bearings
Chris J. Ported B16 head (300+cfm)
Chambers opened to 84mm
Ferrea 6000 series valves
Ferrea valvesprings & retainers
Skunk2 Pro1 cams
Ported OEM GSR oil pump
Golden Eagle IM
Blox 76mm TB
Fluidamper
T1 Koyo Radiator/Spal 13″ Fan/Aluminum Shroud combo

Drivetrain/Chassis:
Bullhead/PPG Dogbox
DSS Pro-level axles, hubs, and spool
Competition Clutch 1000hp Twin Disc
Avid Solid mounts
OmniPower drag coilovers
Callos 3pc.front end
10pt. mild steel cage
Stroud chute
Bogart wheels
M/T 24.5 x 9 x 13 tires

Turbo setup:
Bullseye Power S372R 1.25a/r
SpeedFactory Frontmount divided T4 manifold
SpeedFactory 2qt. catchcan setup
SpeedFactory 3″ aluminum charge piping
Tial MV-S 38mm WG’s
Tial Q BOV
Garrett 925hp intercooler core, custom endtanks
4″ dp

Fueling, etc.
EMS – Hondata S300
Ignition – MSD Digital 6
Precision 1600′s
FJO injector driver box
Dual Bosch 044 pumps
Sumped tank
VP Q16 fuel

We have countless hours of work and preparation into this build.  We have tried to document all the details from the start with tons of pictures and info.  Here is a gallery of the build as it progressed.

6 comments

  • waseem · January 13, 2010 at 4:04 AM

    verynice car, actually was wondering if you have any cars for sale same as this one.

    thanks

  • Author comment by jfk78 · January 22, 2010 at 9:10 PM

    Thanks. Nothing like this for sale, but we can definitely build another one!

  • Josh Hasting · February 4, 2010 at 12:27 PM

    do you guy’s sell this exhaust manifold at all? If so how much?

  • Ryan Medrzycki · February 9, 2010 at 11:40 PM

    I just wanna say you guys started over and small but have the drive and knowledge and are blowing up. Glad to have known you guys from the beggining and glad to see what you guys are doing now! Keep it up! I’m living in Maui and wish I was back there to spend this money I have to get another Hatch. Limited over here to the fullest. Tactown…

  • Author comment by vtecjun · February 10, 2010 at 1:25 PM

    Yes we do sell this manifold. It is a custom peice that we can build for our customers starting around $1200.

  • Josh Hasting · March 23, 2010 at 12:51 PM

    Curious where did you guy’s get the dial indicator setup at?

Leave a Reply